About Burton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Burton: Washington County Fire 154.1450 MHz, narrow FM, CSQ. County-level ems dispatch that covers Burton: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Washington Fire/EMS talkgroup 2533 (hex 9e5).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Burton, start with the Burton site of Texas Wide Area Radio Network (TxWARN), about 2 miles away. Its control channels: 772.54375, 772.96875 MHz.
Data updated .
Washington County channels that also cover Burton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Countywide Fire Dispatch (patched with TxWARN) | 154.1450 | CSQ | FMN | KKV987 |
| Washington County Fire | Washington County Fire – Dispatch | 155.5875 | 445 DPL | FMN | KKV987 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County Fire | Washington County Fire – Fire Ground (patched with TxWARN) | 155.7750 | CSQ | FMN | KNBR717 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Washington County EMS | Dispatch, Sheriff Alternate (simulcasting with TxWARN) | 155.6250 In 154.7100 | 141.3 PL | FMN | WPNW249 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Washington Fire/EMS | Emergency Operations Center | 2533 | 9e5 | D |
| Washington Fire/EMS | VFDs Tactical | 3933 | f5d | D |
| Washington Fire/EMS | VFDs Tactical | 3934 | f5e | D |
| Washington Fire/EMS | VFDs Tactical | 3935 | f5f | D |
| Washington Fire/EMS | VFDs Tactical | 3936 | f60 | D |
| Washington Fire/EMS | VFDs Tactical | 3937 | f61 | D |
| Washington Fire/EMS | Emergency Mgmt. 1 | 3999 | f9f | D |
| Washington Fire/EMS | Emergency Mgmt. 2 | 4000 | fa0 | D |
| Washington Fire/EMS | Volunteer Fire Department Supervisors | 3938 | f62 | D |
| Washington Fire/EMS | EMS Primary | 2529 | 9e1 | D |
| Washington Fire/EMS | EMS Medevac Helicopter Dispatch | 3990 | f96 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3939 | f63 | D |
| Washington Fire/EMS | EMS Supervisors | 3940 | f64 | D |
| Washington Fire/EMS | Washington Fire/EMS – Tactical Channel | 3941 | f65 | D |
| Washington Fire/EMS | EMS Training | 3942 | f66 | D |
| Washington Fire/EMS | EMS to Scott and White Hospital Brenham | 3965 | f7d | D |
Nearest trunked radio sites
Distances are measured from the center of Burton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Burton?
We do not have a fire dispatch channel listed specifically for Burton. The county-level fire dispatch channels in the same county: Washington County Fire 154.1450 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Burton?
We do not have a EMS dispatch channel listed specifically for Burton. The county-level EMS dispatch channels in the same county: Washington County EMS 155.6250 MHz, narrow FM, 141.3 PL.
Do fire departments and EMS use a trunked radio system in Burton?
Yes. The county-level systems that cover Burton are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 16 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Burton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Burton?
For Burton, start with the Burton site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.54375, 772.96875 MHz. Program a control channel first; the scanner finds the voice channels from it.