About Modena Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Modena: Iron County Fire 154.2575 MHz, narrow FM, no tone. Trunked: Utah Communications Authority (P25) (Project 25), for example Iron County Fire talkgroup 8004 (hex 1f44).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Modena, start with the Big Mountain site of Utah Communications Authority (P25), about 25 miles away. Its control channels: 769.33125, 774.30625 MHz.
Data updated .
Iron County channels that also cover Modena
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Iron County Fire | Iron County Fire – Dispatch | 154.2575 In 156.2250 | FMN | WQGI234 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Iron County EMS | Iron County EMS – Alternate | 155.2650 | 203.5 PL | FMN | KNGU697 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Iron County Fire | Fire-EMS Paging 8004 | 8004 | 1f44 | T |
| Iron County Fire | Fire-EMS Paging 8008 | 8008 | 1f48 | T |
| Iron County Fire | Iron County Fire – Dispatch | 8032 | 1f60 | T |
| Iron County Fire | Operations | 8029 | 1f5d | T |
| Iron County Fire | Iron County Fire – Fire Ground | 8033 | 1f61 | T |
| Iron County Fire | Iron County Fire – Tactical Channel | 8035 | 1f63 | T |
| Iron County Fire | Iron County Fire – Tactical Channel | 8036 | 1f64 | T |
| Iron County Fire | Event | 8037 | 1f65 | T |
| Iron County Fire | Iron County Fire – Alternate | 8034 | 1f62 | T |
| Iron County Fire | Search and Rescue | 8042 | 1f6a | T |
| Iron County Fire | Search and Rescue | 8043 | 1f6b | T |
Nearest trunked radio sites
Distances are measured from the center of Modena.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Modena?
We do not have a fire dispatch channel listed specifically for Modena. The county-level fire dispatch channels in the same county: Iron County Fire 154.2575 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Modena?
Yes. The county-level systems that cover Modena are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Modena?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Modena?
For Modena, start with the Big Mountain site of Utah Communications Authority (P25). Its control channels are 769.33125, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.