About East Basin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers East Basin: Summit County Fire 155.0850 MHz, narrow FM, 203.5 PL. Trunked: Utah Communications Authority (P25) (Project 25), for example Summit County Fire talkgroup 5519 (hex 158f).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Utah Communications Authority (P25) (Project 25): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For East Basin, start with the Lewis Peak site of Utah Communications Authority (P25), about 8 miles away. Its control channels: 769.50625, 774.65625 MHz.
Data updated .
Summit County channels that also cover East Basin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Summit County Fire | Summit County Fire – Dispatch Patched to UCA 5520 | 155.0850 | 203.5 PL | FMN | KNHD878 |
Utah Communications Authority (P25)
Project 25 · System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Summit County Fire | Summit County Fire – Dispatch (Automated Dispatch) | 5519 | 158f | T |
| Summit County Fire | Summit County Fire – Fire Ground | 5520 | 1590 | T |
| Summit County Fire | Search and Rescue | 5531 | 159b | T |
| Summit County Fire | Summit County Fire – Alternate | 5521 | 1591 | T |
| Summit County Fire | Summit County Fire – Alternate | 5522 | 1592 | T |
| Summit County Fire | Summit County Fire – Alternate | 5523 | 1593 | T |
| Summit County Fire | Fire/EMS 6 Training | 5524 | 1594 | T |
| Summit County Fire | Summit County Fire – Alternate | 5525 | 1595 | T |
| Summit County Fire | Summit County Fire – Alternate | 5526 | 1596 | T |
| Summit County Fire | Summit County Fire – Alternate | 5527 | 1597 | T |
Nearest trunked radio sites
Distances are measured from the center of East Basin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in East Basin?
We do not have a fire dispatch channel listed specifically for East Basin. The county-level fire dispatch channels in the same county: Summit County Fire 155.0850 MHz, narrow FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in East Basin?
Yes. The county-level systems that cover East Basin are Fire and EMS talkgroups are listed for Utah Communications Authority (P25) (Project 25): 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in East Basin?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in East Basin?
For East Basin, start with the Lewis Peak site of Utah Communications Authority (P25). Its control channels are 769.50625, 774.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.