About Brandy Station Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Brandy Station: Culpeper, County of 159.2400 MHz, narrow FM, CSQ. Trunked: Fauquier/Culpeper/Rappahannock, for example Fauquier Fire/Rescue talkgroup 1001 (hex 3e9).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Fauquier/Culpeper/Rappahannock: 24 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Brandy Station, start with the Culpeper Simulcast site of Fauquier/Culpeper/Rappahannock, about 4 miles away. Its control channels: 853.2375, 854.1125, 854.5375 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Culpeper County channels that also cover Brandy Station
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Culpeper, County of | Fire/Rescue Dispatch (multicast from trunked system) | 159.2400 | CSQ | FMN | WQRE749 |
Fauquier/Culpeper/Rappahannock
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fauquier Fire/Rescue | 11A Dispatch | 1001 | 3e9 | D |
| Rappahannock Fire/Rescue | 14A Dispatch | 3001 | bb9 | D |
| Fauquier Fire/Rescue | 11B Response | 1002 | 3ea | T |
| Fauquier Fire/Rescue | 11C Incident | 1003 | 3eb | T |
| Fauquier Fire/Rescue | 11D Incident | 1004 | 3ec | D |
| Fauquier Fire/Rescue | 11E Incident | 1005 | 3ed | D |
| Fauquier Fire/Rescue | 11F Incident | 1006 | 3ee | D |
| Fauquier Fire/Rescue | 11G Water | 1007 | 3ef | D |
| Fauquier Fire/Rescue | 11H | 1008 | 3f0 | D |
| Fauquier Fire/Rescue | 11I Helicopter | 1009 | 3f1 | D |
| Rappahannock Fire/Rescue | 14B Response | 3002 | bba | D |
| Rappahannock Fire/Rescue | 14C Incident | 3003 | bbb | D |
| Rappahannock Fire/Rescue | 14D Incident | 3004 | bbc | D |
| Rappahannock Fire/Rescue | 14E Incident | 3005 | bbd | D |
| Rappahannock Fire/Rescue | 14F Incident | 3006 | bbe | D |
| Rappahannock Fire/Rescue | 14G Water Supply | 3007 | bbf | D |
| Rappahannock Fire/Rescue | 14I Medevac Landing Zone Operations | 3009 | bc1 | D |
| Rappahannock Fire/Rescue | 14J Special Events | 3010 | bc2 | D |
| Rappahannock Fire/Rescue | 14K Joint Public Safety Interop | 3011 | bc3 | D |
| Rappahannock Fire/Rescue | 14L Training | 3012 | bc4 | D |
| Other EMS | AirCare Dispatch | 1518 | 5ee | D |
| Fauquier Fire/Rescue | Fauquier Hospital | 1620 | 654 | D |
| Rappahannock Fire/Rescue | 14H Fauquier Hospital | 3008 | bc0 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Fauquier Fire/Rescue | 11L | 1012 | 3f4 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Brandy Station.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brandy Station?
We do not have a fire dispatch channel listed specifically for Brandy Station. The county-level fire dispatch channels in the same county: Culpeper, County of 159.2400 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Brandy Station?
Yes. The county-level systems that cover Brandy Station are Fire and EMS talkgroups are listed for Fauquier/Culpeper/Rappahannock: 24 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Brandy Station?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Brandy Station?
For Brandy Station, start with the Culpeper Simulcast site of Fauquier/Culpeper/Rappahannock. Its control channels are 853.2375, 854.1125, 854.5375, 854.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.