About Hampton city Fire and EMS Frequencies
Quick answer: Fire dispatch for Hampton city: Hampton, City of Fire 460.3625 MHz, narrow FM, 146.2 PL. Trunked: Hampton, VA, for example Hampton, VA talkgroup 290 (hex 122).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Hampton, VA: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hampton city, start with the Simulcast site of Hampton, VA. Its control channels: 853.9125, 854.7125, 854.9625 MHz.
Data updated .
Hampton city conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hampton, City of Fire | Hampton, City of Fire – Dispatch /Tactical (Simulcast of digital Fire 1 and 2) | 460.3625 | 146.2 PL | FMN | WQMJ705 |
Hampton city trunked talkgroups
Hampton, VA
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hampton, VA | Hampton, VA – Dispatch | 290 | 122 | D |
| Hampton, VA | Hampton, VA – Dispatch (Automated Dispatch) | 291 | 123 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 292 | 124 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 293 | 125 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 294 | 126 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 295 | 127 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 296 | 128 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 297 | 129 | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 298 | 12a | D |
| Hampton, VA | Air Operations (Landing Zone Coordination) | 299 | 12b | D |
| Hampton, VA | Hampton, VA – Tactical Channel | 300 | 12c | D |
| Shared Fire | Shared Fire – Fire Ground | 205 | cd | D |
| Services EMS | Coliseum First Aid | 361 | 169 | D |
Radio system sites in Hampton city
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hampton city
Common questions
What frequency does the fire department use in Hampton city?
Fire dispatch channels listed for Hampton city: Hampton, City of Fire 460.3625 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Hampton city?
Yes. Fire and EMS talkgroups are listed for Hampton, VA: 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hampton city?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hampton city?
For Hampton city, start with the Simulcast site of Hampton, VA. Its control channels are 853.9125, 854.7125, 854.9625, 855.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hampton city fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Hampton city are marked encrypted.
Are Hampton city fire and EMS talkgroups encrypted?
None of the 13 talkgroups listed for Hampton city are marked encrypted.