Skip to content

Sequim Fire and EMS Frequencies

Sequim in Clallam County, Washington has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Seattle Simulcast (Port Of Seattle (P25)), about 48 miles away.

About Sequim Fire and EMS Frequencies

Quick answer: Fire dispatch for Sequim: Sequim Fire 155.7825 MHz, narrow FM, 123.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Sequim conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Sequim
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequim FireSequim Fire Dispatch155.7825
In 154.0325
123.0 PLFMNWQCH837

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Sequim
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sequim FireFire District #3 Sequim Tactical154.1750FMNKNEM995

Clallam County channels that also cover Sequim

Fire Dispatch

Fire Dispatch frequencies for Clallam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clallam County FireDispatch District 2155.8200
In 158.8950
100.0 PLFMNWQME701
Joyce FireFire District 4154.4450FMN—
Joyce FireJoyce Fire Dispatch155.7225
In 153.9350
100.0 PLFMNWQLB410

Nearest trunked radio sites

Distances are measured from the center of Sequim.

Seattle Simulcast · Port Of Seattle (P25)
Project 25 · RFSS 1 · Site 10 (hex A) · NAC 67A · about 48 mi away
Control 851.6625, 852.3375, 852.3875, 854.4375
Voice 851.2625, 851.3125, 851.5625, 854.2625, 854.3125, 854.6625
Seattle Perimeter (E Madison, 193rd & Fremont, Indianola, West Seattle) Sim · Puget Sound Emergency Radio Network (PSERN)
RFSS 1 · Site 27 (hex 1B) · NAC 3A7 · about 48 mi away
Control 851.5375, 852.7875, 853.675, 854.4875
Voice 851.3625, 851.4125, 853.475, 853.875, 854.8375, 854.9875, 855.3875, 856.0125, 857.3125, 858.3125, 858.8125, 859.3125
Mercer Island Transit Tunnel Simulcast · Puget Sound Emergency Radio Network (PSERN)
RFSS 1 · Site 34 (hex 22) · NAC 3A4 · about 52 mi away
Control 860.9625
Voice 852.7625, 853.65, 854.9625, 855.2125, 855.5875, 856.1375, 856.4625, 856.6375, 856.8625, 857.0625, 857.5375, 858.2375, 858.9625, 859.4625, 860.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sequim?

Fire dispatch channels listed for Sequim: Sequim Fire 155.7825 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Sequim?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sequim?

For Sequim, start with the Seattle Simulcast site of Port Of Seattle (P25). Its control channels are 851.6625, 852.3375, 852.3875, 854.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sequim fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Sequim are marked encrypted.