Skip to content

Lexington Fire and EMS Frequencies

We do not have frequencies listed specifically for Lexington in Cowlitz County, Washington yet. Countywide channels for Cowlitz County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rainier Hill (CRESA 911), about 9 miles away.

About Lexington Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lexington: Cowlitz County Fire 154.1825 MHz, NXDN48, no tone. County-level ems dispatch that covers Lexington: American Medical Response 1 155.3250 MHz, narrow FM, 107.2 PL; American Medical Response 2 155.2200 MHz, narrow FM, no tone.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Cowlitz County channels that also cover Lexington

Fire Dispatch

Fire Dispatch frequencies for Cowlitz County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowlitz County FireCowlitz County Fire – Dispatch
Patched to 154.235
154.1825NXDN48WQXF719
Cowlitz County FireDispatch Analog154.2350156.7 PLFMNWPZR413
Cowlitz County FireCowlitz County Fire – Dispatch
Patched to 154.235
154.3175RAN 42NXDN48WQWY486

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cowlitz County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cowlitz County FireFire Operations154.0250FMNWPZR413
Cowlitz County FireLongview Area Tactical154.4150FMNWPZR413

EMS Dispatch

EMS Dispatch frequencies for Cowlitz County
AgencyDescriptionFrequency (MHz)ToneModeFCC
American Medical Response 1American Medical Response155.3250107.2 PLFMNWPTX797
American Medical Response 2American Medical Response155.2200FMNWPTX797

EMS Talk-around

EMS Talk-around frequencies for Cowlitz County
AgencyDescriptionFrequency (MHz)ToneModeFCC
St. Johns Medical CenterSt. Johns Medical Center155.3400FMN—

Nearest trunked radio sites

Distances are measured from the center of Lexington.

Rainier Hill · CRESA 911
RFSS 1 · Site 3 (hex 3) · NAC 863 · about 9 mi away
Control 852.825, 853.375, 853.9375
Voice 851.2125, 851.925
Speelyai · CRESA 911
RFSS 1 · Site 6 (hex 6) · about 29 mi away
Control 857.9625
Voice 856.9625, 857.4875, 858.9625, 859.9625
Simulcast · CRESA 911
RFSS 1 · Site 1 (hex 1) · NAC 861 · about 34 mi away
Control 858.9375, 859.7625, 859.9375, 860.7625, 860.9375
Voice 851.1875, 851.9625, 856.7625, 856.9375, 857.7625, 857.9375, 858.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lexington?

We do not have a fire dispatch channel listed specifically for Lexington. The county-level fire dispatch channels in the same county: Cowlitz County Fire 154.1825 MHz, NXDN48, no tone.

What frequency does EMS or the ambulance service use in Lexington?

We do not have a EMS dispatch channel listed specifically for Lexington. The county-level EMS dispatch channels in the same county: American Medical Response 1 155.3250 MHz, narrow FM, 107.2 PL; American Medical Response 2 155.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Lexington?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Lexington?

For Lexington, start with the Rainier Hill site of CRESA 911. Its control channels are 852.825, 853.375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.