Skip to content

Franklin County Fire and EMS Frequencies

Franklin County in Washington has 15 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Franklin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Franklin County: Franklin County Fire 154.1750 MHz, narrow FM, no tone.

  • 15 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Franklin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch154.1750
In 154.4150
FMNWQLF400

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireS Tactical150.8050CSQFMNWNUV250
Franklin County FireFire Operations151.3550
In 159.3150
FMNWPBK234
Franklin County FireFire Emergency153.8000167.9 PLFMN—
Franklin County FireD Tactical154.1900100.0 PLFMN—
Franklin County FireConnell Tactical154.2650
In 159.1350
97.4 PLFMNWPXV219
Franklin County FireFire Operations154.8150
In 155.6700
FMNWQLF400
Franklin County FireWest Joe Tactical154.9950
In 159.1200
88.5 PLFMNWNUV250
Franklin County FireBasin City Tactical155.1000
In 159.1650
136.5 PLFMNWQKS348
Franklin County FireFire Operations155.3100
In 155.6100
FMNWQLF400
Franklin County FireTactical Q155.437597.4 PLFMNKDB384
Franklin County FireKahlotus Tactical156.1950
In 158.9925
97.4 PLFMNKDB384
Franklin County FireWashtucna Tactical158.9700
In 154.7100
77.0 PLFMN—
Franklin County FireTactical R159.217597.4 PLFMNKDB384

Fire Talk-around

Fire Talk-around frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireOld North Dispatch153.7850
In 158.7750
CSQFMNWPLZ904

Radio system sites in Franklin County

Program the control channel first; your scanner finds the voice channels from it.

Franklin Co Simulcast · Benton-Franklin County P25
Project 25 · RFSS 1 · Site 3 (hex 3)
Control 854.675
Voice 854.0375, 854.1, 854.1625, 854.225, 854.2875, 854.35, 854.425, 854.525, 854.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Franklin County

Common questions

What frequency does the fire department use in Franklin County?

Fire dispatch channels listed for Franklin County: Franklin County Fire 154.1750 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Franklin County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Franklin County?

For Franklin County, start with the Franklin Co Simulcast site of Benton-Franklin County P25. Its control channels are 854.675 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Franklin County fire and EMS frequencies encrypted?

None of the 15 conventional frequencies listed for Franklin County are marked encrypted.