Skip to content

Freeland Fire and EMS Frequencies

We do not have frequencies listed specifically for Freeland in Island County, Washington yet. Countywide channels for Island County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Seattle Perimeter (E Madison, 193rd & Fremont, Indianola, West Seattle) Sim (Puget Sound Emergency Radio Network (PSERN)), about 31 miles away.

About Freeland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Freeland: County Fire - Paging 154.3400 MHz, narrow FM, 100.0 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Island County channels that also cover Freeland

Fire Dispatch

Fire Dispatch frequencies for Island County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - PagingCounty Fire – Paging154.3400100.0 PLFMNWNWY836

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Island County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - Tactical OperationsCounty Fire – Tactical Operations153.7550
In 154.8300
100.0 PLFMNWPUJ787
County Fire - Tactical OperationsCounty Fire – Tactical Operations154.1750
In 158.9475
100.0 PLFMNWNWY836
County Fire - Tactical OperationsCounty Fire – Tactical Operations155.7450
In 153.9350
100.0 PLFMNWQSF242
County Fire - Tactical Operations CamanoCounty Fire – Tactical Operations Camano154.2950
In 159.1950
100.0 PLFMNWPUJ787
Island County FireCounty Fire – Tactical Operations, Ambulance Paging for Camano/Stanwood154.4300100.0 PLFMNWNWY836

Nearest trunked radio sites

Distances are measured from the center of Freeland.

Seattle Perimeter (E Madison, 193rd & Fremont, Indianola, West Seattle) Sim · Puget Sound Emergency Radio Network (PSERN)
RFSS 1 · Site 27 (hex 1B) · NAC 3A7 · about 31 mi away
Control 851.5375, 852.7875, 853.675, 854.4875
Voice 851.3625, 851.4125, 853.475, 853.875, 854.8375, 854.9875, 855.3875, 856.0125, 857.3125, 858.3125, 858.8125, 859.3125
Seattle Simulcast · Port Of Seattle (P25)
Project 25 · RFSS 1 · Site 10 (hex A) · NAC 67A · about 31 mi away
Control 851.6625, 852.3375, 852.3875, 854.4375
Voice 851.2625, 851.3125, 851.5625, 854.2625, 854.3125, 854.6625
Mercer Island Transit Tunnel Simulcast · Puget Sound Emergency Radio Network (PSERN)
RFSS 1 · Site 34 (hex 22) · NAC 3A4 · about 33 mi away
Control 860.9625
Voice 852.7625, 853.65, 854.9625, 855.2125, 855.5875, 856.1375, 856.4625, 856.6375, 856.8625, 857.0625, 857.5375, 858.2375, 858.9625, 859.4625, 860.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Freeland?

We do not have a fire dispatch channel listed specifically for Freeland. The county-level fire dispatch channels in the same county: County Fire - Paging 154.3400 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Freeland?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Freeland?

For Freeland, start with the Seattle Perimeter (E Madison, 193rd & Fremont, Indianola, West Seattle) Sim site of Puget Sound Emergency Radio Network (PSERN). Its control channels are 851.5375, 852.7875, 853.675, 854.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.