Skip to content

Whidbey Island Station Fire and EMS Frequencies

We do not have frequencies listed specifically for Whidbey Island Station in Island County, Washington yet. Countywide channels for Island County that may also cover this area are shown below when we have them. The closest trunked radio site we have is North Simulcast (Sno911), about 50 miles away.

About Whidbey Island Station Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Whidbey Island Station: County Fire - Paging 154.3400 MHz, narrow FM, 100.0 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Island County channels that also cover Whidbey Island Station

Fire Dispatch

Fire Dispatch frequencies for Island County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - PagingCounty Fire – Paging154.3400100.0 PLFMNWNWY836

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Island County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - Tactical OperationsCounty Fire – Tactical Operations153.7550
In 154.8300
100.0 PLFMNWPUJ787
County Fire - Tactical OperationsCounty Fire – Tactical Operations154.1750
In 158.9475
100.0 PLFMNWNWY836
County Fire - Tactical OperationsCounty Fire – Tactical Operations155.7450
In 153.9350
100.0 PLFMNWQSF242
County Fire - Tactical Operations CamanoCounty Fire – Tactical Operations Camano154.2950
In 159.1950
100.0 PLFMNWPUJ787
Island County FireCounty Fire – Tactical Operations, Ambulance Paging for Camano/Stanwood154.4300100.0 PLFMNWNWY836

Nearest trunked radio sites

Distances are measured from the center of Whidbey Island Station.

North Simulcast · Sno911
RFSS 1 · Site 8 (hex 8) · NAC 3A8 · about 50 mi away
Control 853.5875, 853.6125, 853.75, 853.925
Voice 852.675, 852.9125, 852.9625, 853.3625, 853.3875
South Simulcast · Sno911
RFSS 1 · Site 7 (hex 7) · NAC 3A7 · about 50 mi away
Control 853.85, 854.0125, 854.2125, 854.5625
Voice 851.1125, 851.7375, 852.9375, 853.3, 853.725
Darrington · Sno911
RFSS 1 · Site 11 (hex B) · NAC 3AB · about 50 mi away
Control 854.7375
Voice 852.775, 852.9875, 853.6625, 854.1125, 854.2625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Whidbey Island Station?

We do not have a fire dispatch channel listed specifically for Whidbey Island Station. The county-level fire dispatch channels in the same county: County Fire - Paging 154.3400 MHz, narrow FM, 100.0 PL.

What scanner do I need to listen to fire and EMS in Whidbey Island Station?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Whidbey Island Station?

For Whidbey Island Station, start with the North Simulcast site of Sno911. Its control channels are 853.5875, 853.6125, 853.75, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.