About Parkwood Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Parkwood: Kitsap County Fire 154.3700 MHz, narrow FM, CSQ. County-level ems dispatch that covers Parkwood: Olympic Ambulance Dispatch 462.9500 MHz, narrow FM, 107.2 PL.
- 15 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Kitsap County channels that also cover Parkwood
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kitsap County Fire | Kitsap County Fire – Dispatch (Dispatch) | 154.3700 | CSQ | FMN | KOL696 |
| Kitsap County Fire | Kitsap County Fire – Dispatch (Response) | 155.0250 In 159.0150 | 82.5 PL | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kitsap County Fire | Kitsap County Fire – Fire Ground | 153.7700 | 91.5 PL | FMN | WZX879 |
| Kitsap County Fire | Shared Tactical Pool – Tactical | 153.8150 | 162.2 PL | FMN | WQEM301 |
| Kitsap County Fire | Kitsap County Fire – Fire Ground (Tactical) | 154.4150 | 146.2 PL | FMN | WQGD975 |
| Kitsap County Fire | Shared Tactical Pool – Tactical | 155.2500 | CSQ | FMN | WQEM453 |
| Kitsap County Fire | Special Interop – Spec Operations (BIPD F2) | 155.6700 | 110.9 PL | FMN | KB62943 |
| Kitsap County Fire | Kitsap County Fire – Fire Ground (Tactical) | 155.7750 | 91.5 PL | FMN | KGW695 |
| Kitsap County Fire | Shared Tactical Pool – Tactical | 155.9250 In 154.4150 | 82.5 PL | FMN | WQEM453 |
| Kitsap County Fire | Special Interop – Spec Operations (Poulsbo City) | 156.0150 | 110.9 PL | FMN | KQW507 |
| Kitsap County Fire | Special Interop – Spec Operations (Suquamish F2) | 158.7300 | 110.9 PL | FMN | WQEM301 |
| Kitsap County Fire | Shared Tactical Pool – Tactical | 159.4650 | 162.2 PL | FMN | WAX640 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Olympic Ambulance Dispatch | Olympic Ambulance Dispatch | 462.9500 In 467.9500 | 107.2 PL | FMN | WNHJ395 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kitsap County EMS | MedNet (Repeater) | 462.9750 In 467.9750 | 192.8 PL | FMN | WPJJ763 |
| Kitsap County EMS | MedNet (Repeater) | 463.1750 In 468.1750 | 192.8 PL | FMN | WPJJ763 |
Nearest trunked radio sites
Distances are measured from the center of Parkwood.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Parkwood?
We do not have a fire dispatch channel listed specifically for Parkwood. The county-level fire dispatch channels in the same county: Kitsap County Fire 154.3700 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Parkwood?
We do not have a EMS dispatch channel listed specifically for Parkwood. The county-level EMS dispatch channels in the same county: Olympic Ambulance Dispatch 462.9500 MHz, narrow FM, 107.2 PL.
What scanner do I need to listen to fire and EMS in Parkwood?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Parkwood?
For Parkwood, start with the West Seattle site of South Sound 911. Its control channels are 774.20625, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.