Skip to content

Vantage Fire and EMS Frequencies

We do not have frequencies listed specifically for Vantage in Kittitas County, Washington yet. Countywide channels for Kittitas County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Vantage (MACC 911), about 4 miles away.

About Vantage Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Vantage: Kittitas County Fire 154.2050 MHz, narrow FM, 151.4 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Kittitas County channels that also cover Vantage

Fire Dispatch

Fire Dispatch frequencies for Kittitas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittitas County FireKittitas County Fire – Dispatch154.2050
In 153.7475
151.4 PLFMNWNZR966

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Kittitas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittitas County FireKittitas County Fire – Tactical Channel154.3250203.5 PLFMN—
Kittitas County FireKittitas County Fire – Tactical Channel155.7900
In 151.1225
186.2 PLFMN—
Kittitas County FireKittitas County Fire – Tactical Channel159.2025210.7 PLFMN—

Fire Talk-around

Fire Talk-around frequencies for Kittitas County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kittitas County FireFire Operations155.1375
In 153.8150
162.2 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Vantage.

Vantage · MACC 911
RFSS 10 · Site 18 (hex 12) · NAC 29B · about 4 mi away
Control 851.4875
Voice 851.225, 851.85, 852.2, 853.325
South Simulcast · MACC 911
RFSS 10 · Site 16 (hex 10) · NAC 29B · about 12 mi away
Control 851.6875, 852.3875, 852.9375, 853.3875
Voice 851.175, 851.4375, 852.7, 853.775
North Simulcast · MACC 911
RFSS 10 · Site 17 (hex 11) · NAC 29B · about 25 mi away
Control 859.4625
Voice 855.7375, 856.7625, 856.9875, 857.7125, 858.4625, 858.7625, 859.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Vantage?

We do not have a fire dispatch channel listed specifically for Vantage. The county-level fire dispatch channels in the same county: Kittitas County Fire 154.2050 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Vantage?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Vantage?

For Vantage, start with the Vantage site of MACC 911. Its control channels are 851.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.