Skip to content

Naselle Fire and EMS Frequencies

Naselle in Pacific County, Washington has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Nicolai Mtn (CRESA 911), about 28 miles away.

About Naselle Fire and EMS Frequencies

Quick answer: Fire dispatch for Naselle: Naselle Fire 154.2200 MHz, narrow FM, no tone.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Naselle conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Naselle
AgencyDescriptionFrequency (MHz)ToneModeFCC
Naselle FireNaselle Fire – Dispatch154.2200FMNKNAU481

Pacific County channels that also cover Naselle

Fire Dispatch

Fire Dispatch frequencies for Pacific County
AgencyDescriptionFrequency (MHz)ToneModeFCC
North Pacific County Fire DispatchNorth Pacific County Fire Dispatch154.1900127.3 PLFMNKEG288
Pacific County FireFire District 1 Traffic154.2050FMNKEG288
Pacific County FireFire District 1 Work154.4150FMNKEG288
South Pacific County Fire DispatchSouth Pacific County Fire Dispatch155.1450127.3 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Naselle.

Nicolai Mtn · CRESA 911
RFSS 1 · Site 5 (hex 5) · NAC 865 · about 28 mi away
Control 857.9875, 858.9875
Voice 856.9875, 859.9875, 860.9875
Rainier Hill · CRESA 911
RFSS 1 · Site 3 (hex 3) · NAC 863 · about 46 mi away
Control 852.825, 853.375, 853.9375
Voice 851.2125, 851.925
S Thurston Simulcast · TCERN (Thurston County Emergency Radio Network)
RFSS 1 · Site 2 (hex 2) · NAC AF2 · about 52 mi away
Control 770.53125, 773.16875, 774.15625, 774.40625
Voice 769.09375, 770.03125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Naselle?

Fire dispatch channels listed for Naselle: Naselle Fire 154.2200 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Naselle?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Naselle?

For Naselle, start with the Nicolai Mtn site of CRESA 911. Its control channels are 857.9875, 858.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Naselle fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Naselle are marked encrypted.