About Cusick Fire and EMS Frequencies
Quick answer: Fire dispatch for Cusick: Cusick Fire 153.9200 MHz, narrow FM, no tone.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 5 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Cusick conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cusick Fire | Cusick Fire – Dispatch | 153.9200 | FMN | KNAR885 |
Pend Oreille County channels that also cover Cusick
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pend Oreille County Fire | Pend Oreille County Fire – Dispatch Mid | 154.0325 In 151.4000 | NAC 156 | P25 | WPKQ914 |
| Pend Oreille County Fire | Pend Oreille County Fire – Dispatch – South | 158.7525 In 154.2650 | NAC 100 | P25 | WPKQ914 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pend Oreille County Fire | Pend Oreille County Fire – Tactical Channel | 150.9950 | NAC 192 | P25 | WPKQ914 |
| Pend Oreille County Fire | Pend Oreille County Fire – Dispatch – North | 154.0850 In 156.0525 | NAC 179 | P25 | WPKQ914 |
| Pend Oreille County Fire | Pend Oreille County Fire – Tactical Channel | 154.2350 | NAC 186 | P25 | WPKQ914 |
Nearest trunked radio sites
Distances are measured from the center of Cusick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cusick?
Fire dispatch channels listed for Cusick: Cusick Fire 153.9200 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Cusick?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Cusick?
For Cusick, start with the Hoodoo site of Spokane Regional Emergency Communications System. Its control channels are 853.675, 853.825 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cusick fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Cusick are marked encrypted.