Skip to content

Grand Marsh Fire and EMS Frequencies

We do not have frequencies listed specifically for Grand Marsh in Adams County, Wisconsin yet. Countywide channels for Adams County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Oxford (WISCOM), about 3 miles away.

About Grand Marsh Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grand Marsh: Adams County Fire 151.3250 MHz, narrow FM, 241.8 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Adams County channels that also cover Grand Marsh

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireEmergency Management/Fire/EMS151.3250
In 153.9200
241.8 PLFMNWPKX329
Adams County FireFire Paging154.1000
In 156.0150
173.8 PLFMNKNAI754

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Fire Ground154.325091.5 PLFMNWNXC514
Adams County FireTact154.415091.5 PLFMNWNXC514

Fire Talk-around

Fire Talk-around frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams Fire District154.4450
In 153.9500
91.5 PLFMNWNXC514

Hospitals & Medical

Hospitals & Medical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County HospitalMoundview Memorial Hospital155.3400173.8 PLFMNWPYN319

Nearest trunked radio sites

Distances are measured from the center of Grand Marsh.

Oxford · WISCOM
RFSS 1 · Site 5 (hex 5) · NAC B06 · about 3 mi away
Control 139.8125, 152.1275, 152.5025
Voice 155.52, 155.61
DHS Sand Ridge · WISCOM
RFSS 1 · Site 222 (hex DE) · NAC B0C · about 19 mi away
Control 858.9375, 859.9375
Voice 856.1375, 856.9375
Rome · WISCOM
RFSS 1 · Site 35 (hex 23) · NAC B0A · about 20 mi away
Control 139.2125, 152.1575, 152.7125
Voice 152.0375, 155.43
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grand Marsh?

We do not have a fire dispatch channel listed specifically for Grand Marsh. The county-level fire dispatch channels in the same county: Adams County Fire 151.3250 MHz, narrow FM, 241.8 PL.

What scanner do I need to listen to fire and EMS in Grand Marsh?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Grand Marsh?

For Grand Marsh, start with the Oxford site of WISCOM. Its control channels are 139.8125, 152.1275, 152.5025 MHz. Program a control channel first; the scanner finds the voice channels from it.