Skip to content

Glidden Fire and EMS Frequencies

We do not have frequencies listed specifically for Glidden in Ashland County, Wisconsin yet. Countywide channels for Ashland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mellen (WISCOM), about 11 miles away.

About Glidden Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Glidden: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ashland County channels that also cover Glidden

Fire Dispatch

Fire Dispatch frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashland County FireAshland County Fire – Dispatch154.9950
In 153.8600
251 DPLFMNWPXW563

Fire Talk-around

Fire Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bad River Band of Lake Superior Chippewa Indians FireBad River Band of Lake Superior Chippewa Indians Fire – Alternate154.1450107.2 PLFMNWQBC355

EMS Talk-around

EMS Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesMemorial Medical Center155.1750107.2 PLFMNWQBJ709

Hospitals & Medical

Hospitals & Medical frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesEMS to Memorial Medical Center155.3400107.2 PLFMNWQBJ709

Nearest trunked radio sites

Distances are measured from the center of Glidden.

Mellen · WISCOM
RFSS 1 · Site 63 (hex 3F) · NAC B06 · about 11 mi away
Control 139.0875, 152.0375, 152.7875
Voice 151.235, 154.385
Park Falls · WISCOM
RFSS 1 · Site 66 (hex 42) · NAC B07 · about 15 mi away
Control 139.2125, 152.1575, 152.5325
Voice 154.34, 155.19
Mercer · WISCOM
RFSS 1 · Site 64 (hex 40) · NAC B09 · about 22 mi away
Control 139.2625, 139.6625, 151.385
Voice 154.755, 155.025
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Glidden?

We do not have a fire dispatch channel listed specifically for Glidden. The county-level fire dispatch channels in the same county: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

What scanner do I need to listen to fire and EMS in Glidden?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Glidden?

For Glidden, start with the Mellen site of WISCOM. Its control channels are 139.0875, 152.0375, 152.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.