Skip to content

Odanah Fire and EMS Frequencies

We do not have frequencies listed specifically for Odanah in Ashland County, Wisconsin yet. Countywide channels for Ashland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Hillside (WISCOM), about 12 miles away.

About Odanah Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Odanah: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ashland County channels that also cover Odanah

Fire Dispatch

Fire Dispatch frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashland County FireAshland County Fire – Dispatch154.9950
In 153.8600
251 DPLFMNWPXW563

Fire Talk-around

Fire Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bad River Band of Lake Superior Chippewa Indians FireBad River Band of Lake Superior Chippewa Indians Fire – Alternate154.1450107.2 PLFMNWQBC355

EMS Talk-around

EMS Talk-around frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesMemorial Medical Center155.1750107.2 PLFMNWQBJ709

Hospitals & Medical

Hospitals & Medical frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Medical Support & FacilitiesEMS to Memorial Medical Center155.3400107.2 PLFMNWQBJ709

Nearest trunked radio sites

Distances are measured from the center of Odanah.

Hillside · WISCOM
RFSS 1 · Site 122 (hex 7A) · NAC B03 · about 12 mi away
Control 151.1825, 151.2275, 151.295, 151.3375
Bayfield · WISCOM
RFSS 1 · Site 67 (hex 43) · NAC B0C · about 18 mi away
Control 139.4125, 152.5925, 152.7575
Voice 154.725, 155.13
Red Cliff · WISCOM
RFSS 1 · Site 121 (hex 79) · NAC B0C · about 20 mi away
Control 154.0475, 154.9275, 155.07, 155.1, 155.55
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Odanah?

We do not have a fire dispatch channel listed specifically for Odanah. The county-level fire dispatch channels in the same county: Ashland County Fire 154.9950 MHz, narrow FM, 251 DPL.

What scanner do I need to listen to fire and EMS in Odanah?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Odanah?

For Odanah, start with the Hillside site of WISCOM. Its control channels are 151.1825, 151.2275, 151.295, 151.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.