Skip to content

Herbster Fire and EMS Frequencies

We do not have frequencies listed specifically for Herbster in Bayfield County, Wisconsin yet. Countywide channels for Bayfield County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Port Wing (WISCOM), about 5 miles away.

About Herbster Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Herbster: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL. Trunked: WISCOM, for example Bayfield County Fire talkgroup 24505 (hex 5fb9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Herbster, start with the Port Wing site of WISCOM, about 5 miles away. Its control channels: 151.01, 151.3325, 154.1825 MHz.

Data updated .

Bayfield County channels that also cover Herbster

Fire Dispatch

Fire Dispatch frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Dispatch154.9800
In 153.9800
146.2 PLFMNWQVI450

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bayfield County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bayfield County FireFire/EMS Fireground/Tactical154.2200146.2 PLFMNWPNP958

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Bayfield County FireBayfield County Page245055fb9D
Bayfield County FireBayfield County Fire245075fbbD
Bayfield County FireBayfield County Fire245085fbcD
Bayfield County EMSBayfield County EMS245065fbaD
Bayfield County EMSGreat Divide EMS245265fceD

Nearest trunked radio sites

Distances are measured from the center of Herbster.

Port Wing · WISCOM
RFSS 1 · Site 123 (hex 7B) · NAC B0C · about 5 mi away
Control 151.01, 151.3325, 154.1825
Voice 155.6025
Bayfield · WISCOM
RFSS 1 · Site 67 (hex 43) · NAC B0C · about 19 mi away
Control 139.4125, 152.5925, 152.7575
Voice 154.725, 155.13
Hillside · WISCOM
RFSS 1 · Site 122 (hex 7A) · NAC B03 · about 20 mi away
Control 151.1825, 151.2275, 151.295, 151.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Herbster?

We do not have a fire dispatch channel listed specifically for Herbster. The county-level fire dispatch channels in the same county: Bayfield County Fire 154.9800 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Herbster?

Yes. The county-level systems that cover Herbster are Fire and EMS talkgroups are listed for WISCOM: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Herbster?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Herbster?

For Herbster, start with the Port Wing site of WISCOM. Its control channels are 151.01, 151.3325, 154.1825 MHz. Program a control channel first; the scanner finds the voice channels from it.