Skip to content

Danbury Fire and EMS Frequencies

We do not have frequencies listed specifically for Danbury in Burnett County, Wisconsin yet. Countywide channels for Burnett County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dairyland (WISCOM), about 18 miles away.

About Danbury Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Danbury: Burnett County Fire 155.8650 MHz, narrow FM, 136.5 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Burnett County channels that also cover Danbury

Fire Dispatch

Fire Dispatch frequencies for Burnett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Burnett County FireFire/EMS Paging155.8650
In 153.7400
136.5 PLFMNKQZ958
Burnett County FireCounty Fire Dispatch158.7975
In 153.9725
110.9 PLFMNWQPZ610

Fire Talk-around

Fire Talk-around frequencies for Burnett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Burnett County FireBurnett County Fire – Fire Ground154.4150110.9 PLFMNWPAJ766

EMS Talk-around

EMS Talk-around frequencies for Burnett County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Burnett County EMSBurnett Medical Center152.0075CSQFMNKXK977
Burnett County EMSEMS to Burnett Medical Center (BLS)155.3400110.9 PLFMNKXK977

Nearest trunked radio sites

Distances are measured from the center of Danbury.

Dairyland · WISCOM
RFSS 1 · Site 126 (hex 7E) · NAC B06 · about 18 mi away
Control 152.03, 152.5175, 152.6825
Voice 151.0475, 153.1325
Frederic · WISCOM
RFSS 1 · Site 60 (hex 3C) · NAC B00 · about 26 mi away
Control 139.0875, 152.0375, 152.1425
Voice 152.8025, 155.685
Lampson · WISCOM
RFSS 1 · Site 102 (hex 66) · NAC B03 · about 28 mi away
Control 139.3125, 139.8125, 150.965
Voice 151.325, 155.07
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Danbury?

We do not have a fire dispatch channel listed specifically for Danbury. The county-level fire dispatch channels in the same county: Burnett County Fire 155.8650 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Danbury?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Danbury?

For Danbury, start with the Dairyland site of WISCOM. Its control channels are 152.03, 152.5175, 152.6825 MHz. Program a control channel first; the scanner finds the voice channels from it.