About Holcombe Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Holcombe: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Chippewa County channels that also cover Holcombe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chippewa County Fire | Chippewa County Fire – Dispatch – West | 154.4300 In 153.7700 | 125 DPL | FMN | WYK523 |
| Chippewa County Fire | Chippewa County Fire – Dispatch – East | 154.4300 In 153.7700 | 165 DPL | FMN | WYK523 |
| Chippewa County Fire | Fire/EMS Paging | 155.0700 | 110.9 PL | FMN | KNGQ623 |
| Chippewa County Fire | Local Govt/Fire Tactical/Siren Control | 155.8350 In 153.9950 | 110.9 PL | FMN | KYA24 |
Nearest trunked radio sites
Distances are measured from the center of Holcombe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Holcombe?
We do not have a fire dispatch channel listed specifically for Holcombe. The county-level fire dispatch channels in the same county: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.
What scanner do I need to listen to fire and EMS in Holcombe?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Holcombe?
For Holcombe, start with the Holcombe site of WISCOM. Its control channels are 139.0125, 151.265, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.