Skip to content

Jim Falls Fire and EMS Frequencies

We do not have frequencies listed specifically for Jim Falls in Chippewa County, Wisconsin yet. Countywide channels for Chippewa County that may also cover this area are shown below when we have them. The closest trunked radio site we have is DOC Chippewa Falls (WISCOM), about 10 miles away.

About Jim Falls Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jim Falls: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Chippewa County channels that also cover Jim Falls

Fire Dispatch

Fire Dispatch frequencies for Chippewa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chippewa County FireChippewa County Fire – Dispatch – West154.4300
In 153.7700
125 DPLFMNWYK523
Chippewa County FireChippewa County Fire – Dispatch – East154.4300
In 153.7700
165 DPLFMNWYK523
Chippewa County FireFire/EMS Paging155.0700110.9 PLFMNKNGQ623
Chippewa County FireLocal Govt/Fire Tactical/Siren Control155.8350
In 153.9950
110.9 PLFMNKYA24

Nearest trunked radio sites

Distances are measured from the center of Jim Falls.

DOC Chippewa Falls · WISCOM
RFSS 1 · Site 202 (hex CA) · NAC B0C · about 10 mi away
Control 773.03125, 773.33125
Voice 773.78125, 774.08125, 774.53125
Chippewa Falls · WISCOM
RFSS 1 · Site 50 (hex 32) · NAC b02 · about 14 mi away
Control 139.3625, 139.8625, 152.8175
Voice 151.04, 155.355
Holcombe · WISCOM
RFSS 1 · Site 53 (hex 35) · NAC B0C · about 17 mi away
Control 139.0125, 151.265, 152.7425
Voice 155.385, 155.58
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jim Falls?

We do not have a fire dispatch channel listed specifically for Jim Falls. The county-level fire dispatch channels in the same county: Chippewa County Fire 154.4300 MHz, narrow FM, 125 DPL.

What scanner do I need to listen to fire and EMS in Jim Falls?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Jim Falls?

For Jim Falls, start with the DOC Chippewa Falls site of WISCOM. Its control channels are 773.03125, 773.33125 MHz. Program a control channel first; the scanner finds the voice channels from it.