Skip to content

Sandy Hook Fire and EMS Frequencies

We do not have frequencies listed specifically for Sandy Hook in Grant County, Wisconsin yet. Countywide channels for Grant County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kieler (WISCOM), about 5 miles away.

About Sandy Hook Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sandy Hook: Grant County Fire 155.7450 MHz, narrow FM, 91.5 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Grant County channels that also cover Sandy Hook

Fire Dispatch

Fire Dispatch frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FireGrant County Fire – Dispatch155.7450
In 153.9950
91.5 PLFMNKVW938
Grant County FireFire Link460.3625241.8 PLFMNWQVI287

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County FireGrant County Fire – Fire Ground154.3400123.0 PLFMNWPKC434

Hospitals & Medical

Hospitals & Medical frequencies for Grant County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grant County HospitalEMS to Grant Co Hospitals155.3400123.0 PLFMNWNLQ653

Nearest trunked radio sites

Distances are measured from the center of Sandy Hook.

Kieler · WISCOM
RFSS 1 · Site 9 (hex 9) · NAC B09 · about 5 mi away
Control 139.6125, 152.0225, 152.7725
Voice 152.5475, 154.7325
Darlington · WISCOM
RFSS 1 · Site 88 (hex 58) · NAC B0E · about 26 mi away
Control 139.1125, 139.2625, 139.6625
Voice 154.235, 155.625
Bloomington · WISCOM
RFSS 1 · Site 7 (hex 7) · NAC B08 · about 30 mi away
Control 139.0875, 152.1125, 152.5025
Voice 150.89, 154.22
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sandy Hook?

We do not have a fire dispatch channel listed specifically for Sandy Hook. The county-level fire dispatch channels in the same county: Grant County Fire 155.7450 MHz, narrow FM, 91.5 PL.

What scanner do I need to listen to fire and EMS in Sandy Hook?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sandy Hook?

For Sandy Hook, start with the Kieler site of WISCOM. Its control channels are 139.6125, 152.0225, 152.7725 MHz. Program a control channel first; the scanner finds the voice channels from it.