Skip to content

Woodford Fire and EMS Frequencies

We do not have frequencies listed specifically for Woodford in Lafayette County, Wisconsin yet. Countywide channels for Lafayette County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Monticello (WISCOM), about 9 miles away.

About Woodford Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Woodford: Lafayette County Fire 154.0850 MHz, narrow FM, 94.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lafayette County channels that also cover Woodford

Fire Dispatch

Fire Dispatch frequencies for Lafayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lafayette County FireFire/EMS/Paging154.0850
In 158.8650
94.8 PLFMNKAQ667
Lafayette County FireFire Link453.8500229.1 PLFMNWQYE998

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lafayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lafayette County FireLafayette County Fire – Fire Ground154.3850114.8 PLFMNWNMB719

Hospitals & Medical

Hospitals & Medical frequencies for Lafayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lafayette County HospitalEMS to Memorial Hospital155.3400114.8 PLFMNKNAZ325

Nearest trunked radio sites

Distances are measured from the center of Woodford.

Monticello · WISCOM
RFSS 1 · Site 18 (hex 12) · NAC B0E · about 9 mi away
Control 139.1625, 152.0375, 152.7425
Voice 153.5375, 154.935
Darlington · WISCOM
RFSS 1 · Site 88 (hex 58) · NAC B0E · about 14 mi away
Control 139.1125, 139.2625, 139.6625
Voice 154.235, 155.625
Dodgeville · WISCOM
RFSS 1 · Site 125 (hex 7D) · NAC B0C · about 26 mi away
Control 150.92, 153.215, 155.5125
Voice 154.755, 155.67
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Woodford?

We do not have a fire dispatch channel listed specifically for Woodford. The county-level fire dispatch channels in the same county: Lafayette County Fire 154.0850 MHz, narrow FM, 94.8 PL.

What scanner do I need to listen to fire and EMS in Woodford?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Woodford?

For Woodford, start with the Monticello site of WISCOM. Its control channels are 139.1625, 152.0375, 152.7425 MHz. Program a control channel first; the scanner finds the voice channels from it.