Skip to content

Summit Lake Fire and EMS Frequencies

We do not have frequencies listed specifically for Summit Lake in Langlade County, Wisconsin yet. Countywide channels for Langlade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lookout Mountain (WISCOM), about 13 miles away.

About Summit Lake Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Summit Lake: Langlade County Fire 155.0250 MHz, narrow FM, 127.3 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Langlade County channels that also cover Summit Lake

Fire Dispatch

Fire Dispatch frequencies for Langlade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Langlade County FireLanglade County Fire – Dispatch155.0250
In 158.9250
127.3 PLFMNKEU967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Langlade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Langlade County FireLanglade County Fire – Fire Ground154.3100146.2 PLFMNWNRU354

Fire Talk-around

Fire Talk-around frequencies for Langlade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Towns FireTown of Antigo Fire154.1750127.3 PLFMNWNQG978
Towns FireNorwood Fire155.5575
In 159.1800
FMNWREJ282
Towns FireLanglade County Rural Fire Control Corp, Antigo155.7450127.3 PLFMNWPMI525

Hospitals & Medical

Hospitals & Medical frequencies for Langlade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Langlade County HospitalLanglade County Memorial Hospital155.340088.5 PLFMNKDB640
Langlade County HospitalHospital Link453.4000
In 458.4000
186.2 PLFMNKDB640

Nearest trunked radio sites

Distances are measured from the center of Summit Lake.

Lookout Mountain · WISCOM
RFSS 1 · Site 31 (hex 1F) · NAC B0A · about 13 mi away
Control 139.9625, 152.1875, 152.6675
Voice 151.07, 155.01
Kent · WISCOM
RFSS 1 · Site 107 (hex 6B) · NAC B0B · about 16 mi away
Control 139.8125, 152.0225, 152.1425
Voice 155.46, 155.955
Crandon · WISCOM
RFSS 1 · Site 27 (hex 1B) · NAC B06 · about 20 mi away
Control 139.7375, 151.235, 152.8175
Voice 154.16, 155.325
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Summit Lake?

We do not have a fire dispatch channel listed specifically for Summit Lake. The county-level fire dispatch channels in the same county: Langlade County Fire 155.0250 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Summit Lake?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Summit Lake?

For Summit Lake, start with the Lookout Mountain site of WISCOM. Its control channels are 139.9625, 152.1875, 152.6675 MHz. Program a control channel first; the scanner finds the voice channels from it.