About Briggsville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Briggsville: Marquette County Fire 151.3850 MHz, narrow FM, 79.7 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Marquette County channels that also cover Briggsville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marquette County Fire | County Fire | 151.3850 In 155.9850 | 79.7 PL | FMN | KNJF417 |
| Marquette County Fire | Fire/EMS Paging | 155.8800 In 153.7400 | 136.5 PL | FMN | WNCQ322 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Marquette County Fire | Endeavor/Moundville Fire Local | 154.4300 | 136.5 PL | FMN | WNQW773 |
Nearest trunked radio sites
Distances are measured from the center of Briggsville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Briggsville?
We do not have a fire dispatch channel listed specifically for Briggsville. The county-level fire dispatch channels in the same county: Marquette County Fire 151.3850 MHz, narrow FM, 79.7 PL.
What scanner do I need to listen to fire and EMS in Briggsville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Briggsville?
For Briggsville, start with the DOC Portage site of WISCOM. Its control channels are 851.3875, 851.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.