Skip to content

Arkansaw Fire and EMS Frequencies

We do not have frequencies listed specifically for Arkansaw in Pepin County, Wisconsin yet. Countywide channels for Pepin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Elmwood (WISCOM), about 11 miles away.

About Arkansaw Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Arkansaw: Pepin County Fire 154.1750 MHz, narrow FM, 103.5 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pepin County channels that also cover Arkansaw

Fire Dispatch

Fire Dispatch frequencies for Pepin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pepin County FireDurand Fire Department154.1750
In 150.8050
103.5 PLFMNWPUU283
Pepin County FirePepin County Fire – Dispatch154.8150
In 159.1800
173.8 PLFMNKVF510

Nearest trunked radio sites

Distances are measured from the center of Arkansaw.

Elmwood · WISCOM
RFSS 1 · Site 51 (hex 33) · NAC b04 · about 11 mi away
Control 139.1625, 152.1425, 152.6525
Voice 151.22, 151.475
Nelson · WISCOM
RFSS 1 · Site 55 (hex 37) · NAC b05 · about 15 mi away
Control 139.0875, 152.0375, 152.1275
Voice 152.5325, 152.6375
Rock Falls · WISCOM
RFSS 1 · Site 134 (hex 86) · NAC B02 · about 17 mi away
Control 150.8975, 155.46, 155.67
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Arkansaw?

We do not have a fire dispatch channel listed specifically for Arkansaw. The county-level fire dispatch channels in the same county: Pepin County Fire 154.1750 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Arkansaw?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Arkansaw?

For Arkansaw, start with the Elmwood site of WISCOM. Its control channels are 139.1625, 152.1425, 152.6525 MHz. Program a control channel first; the scanner finds the voice channels from it.