Skip to content

Hager City Fire and EMS Frequencies

We do not have frequencies listed specifically for Hager City in Pierce County, Wisconsin yet. Countywide channels for Pierce County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bay City 700 (WISCOM), about 10 miles away.

About Hager City Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hager City: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL. County-level ems dispatch that covers Hager City: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Pierce County channels that also cover Hager City

Fire Dispatch

Fire Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FireFire/EMS/Services Paging152.0075186.2 PLFMNWYK670
Pierce County FireRiver Falls Fire/EMS to St. Croix County Fire (for runs into St. Croix County)154.3250186.2 PLFMNWQUJ294
Pierce County FirePierce County Fire – Dispatch154.4000
In 150.7750
186.2 PLFMNWQUJ294

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County FirePierce County Fire – Fire Ground – Countywide154.130082.5 PLFMNWQUJ294

EMS Dispatch

EMS Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County EMSEMS Operations154.980067.0 PLFMNKNCP850

Nearest trunked radio sites

Distances are measured from the center of Hager City.

Bay City 700 · WISCOM
RFSS 1 · Site 247 (hex F7) · NAC B0D · about 10 mi away
Control 773.06875, 773.31875, 774.06875, 774.31875, 774.56875
Prescott · WISCOM
RFSS 1 · Site 57 (hex 39) · NAC b0d · about 16 mi away
Control 139.0125, 139.6125, 139.7375
Voice 152.7425, 154.415
Elmwood · WISCOM
RFSS 1 · Site 51 (hex 33) · NAC b04 · about 23 mi away
Control 139.1625, 152.1425, 152.6525
Voice 151.22, 151.475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hager City?

We do not have a fire dispatch channel listed specifically for Hager City. The county-level fire dispatch channels in the same county: Pierce County Fire 152.0075 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Hager City?

We do not have a EMS dispatch channel listed specifically for Hager City. The county-level EMS dispatch channels in the same county: Pierce County EMS 154.9800 MHz, narrow FM, 67.0 PL.

What scanner do I need to listen to fire and EMS in Hager City?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Hager City?

For Hager City, start with the Bay City 700 site of WISCOM. Its control channels are 773.06875, 773.31875, 774.06875, 774.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.