Skip to content

Gotham Fire and EMS Frequencies

We do not have frequencies listed specifically for Gotham in Richland County, Wisconsin yet. Countywide channels for Richland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Highland (WISCOM), about 13 miles away.

About Gotham Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Gotham: Richland County Fire 154.3550 MHz, narrow FM, 131 DPL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Richland County channels that also cover Gotham

Fire Dispatch

Fire Dispatch frequencies for Richland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richland County FireRichland County Fire – Paging154.3550
In 156.1575
131 DPLFMNWQPM421
Richland County FireRichland County Fire – Dispatch155.0550
In 158.8950
NAC 534P25KCX410

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Richland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richland County FireRichland County Fire – Fire Ground151.2275331 DPLFMNKSC277
Richland County FireRichland County Fire – Fire Ground158.7525331 DPLFMNKSC277

Hospitals & Medical

Hospitals & Medical frequencies for Richland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Richland County HospitalRichland Hospital155.3400118.8 PLFMNWQDF508

Nearest trunked radio sites

Distances are measured from the center of Gotham.

Highland · WISCOM
RFSS 1 · Site 8 (hex 8) · NAC B0F · about 13 mi away
Control 139.3625, 139.8625, 152.7575
Voice 151.04, 151.415
Dodgeville · WISCOM
RFSS 1 · Site 125 (hex 7D) · NAC B0C · about 20 mi away
Control 150.92, 153.215, 155.5125
Voice 154.755, 155.67
DOC Boscobel · WISCOM
RFSS 1 · Site 219 (hex DB) · about 21 mi away
Control 851.4875, 851.9875
Voice 852.4875, 852.9875, 853.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Gotham?

We do not have a fire dispatch channel listed specifically for Gotham. The county-level fire dispatch channels in the same county: Richland County Fire 154.3550 MHz, narrow FM, 131 DPL.

What scanner do I need to listen to fire and EMS in Gotham?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Gotham?

For Gotham, start with the Highland site of WISCOM. Its control channels are 139.3625, 139.8625, 152.7575 MHz. Program a control channel first; the scanner finds the voice channels from it.