Skip to content

Reserve Fire and EMS Frequencies

We do not have frequencies listed specifically for Reserve in Sawyer County, Wisconsin yet. Countywide channels for Sawyer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Pipestone (WISCOM), about 8 miles away.

About Reserve Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Reserve: Sawyer County Fire 155.0250 MHz, narrow FM, 141.3 PL. Trunked: WISCOM, for example Sawyer County Fire talkgroup 55505 (hex d8d1).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: WISCOM: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Reserve, start with the Pipestone site of WISCOM, about 8 miles away. Its control channels: 151.1, 151.37, 152.6 MHz.

Data updated .

Sawyer County channels that also cover Reserve

Fire Dispatch

Fire Dispatch frequencies for Sawyer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sawyer County FireSawyer County Fire – Paging155.0250
In 158.9550
141.3 PLFMNKTV630

Fire Talk-around

Fire Talk-around frequencies for Sawyer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hayward (Town)Services / Fire155.8950
In 158.8950
141.3 PLFMNWNCC207

WISCOM

WISCOM talkgroups
AgencyDescriptionTalkgroupHexMode
Sawyer County FireSawyer County Page55505d8d1D
Sawyer County FireSawyer County Fire55507d8d3D
Sawyer County FireSawyer County Fire55508d8d4D
Sawyer County EMSSawyer County EMS55506d8d2D

Nearest trunked radio sites

Distances are measured from the center of Reserve.

Pipestone · WISCOM
RFSS 1 · Site 158 (hex 9E) · NAC B0C · about 8 mi away
Control 151.1, 151.37, 152.6
Voice 153.05, 153.335
Meteor · WISCOM
RFSS 1 · Site 65 (hex 41) · NAC B0C · about 9 mi away
Control 139.7625, 150.92, 152.1275
Voice 151.445, 154.845
Hayward · WISCOM
RFSS 1 · Site 61 (hex 3D) · NAC B08 · about 12 mi away
Control 139.7375, 151.055
Voice 151.34, 154.19, 154.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Reserve?

We do not have a fire dispatch channel listed specifically for Reserve. The county-level fire dispatch channels in the same county: Sawyer County Fire 155.0250 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in Reserve?

Yes. The county-level systems that cover Reserve are Fire and EMS talkgroups are listed for WISCOM: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Reserve?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Reserve?

For Reserve, start with the Pipestone site of WISCOM. Its control channels are 151.1, 151.37, 152.6 MHz. Program a control channel first; the scanner finds the voice channels from it.