Skip to content

Pine River Fire and EMS Frequencies

We do not have frequencies listed specifically for Pine River in Waushara County, Wisconsin yet. Countywide channels for Waushara County that may also cover this area are shown below when we have them. The closest trunked radio site we have is DOC Redgranite (WISCOM), about 7 miles away.

About Pine River Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Pine River: Waushara County Fire 154.0550 MHz, narrow FM, 114.8 PL. County-level ems dispatch that covers Pine River: Waushara County EMS 155.8650 MHz, narrow FM, 114.8 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Waushara County channels that also cover Pine River

Fire Dispatch

Fire Dispatch frequencies for Waushara County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Waushara County FireFire / Paging154.0550114.8 PLFMNKNEE622
Waushara County FireWaushara County Fire – Paging154.1750
In 150.7900
114.8 PLFMNKNEE622
Waushara County FireWaushara County Fire – Dispatch154.2200
In 156.1050
107.2 PLFMNKNEE626

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Waushara County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Waushara County FireWaushara County Fire – Fire Ground154.0100114.8 PLFMNKNEE622

EMS Dispatch

EMS Dispatch frequencies for Waushara County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Waushara County EMSWaushara County EMS – Dispatch155.8650
In 153.9350
114.8 PLFMNKNEE626

Nearest trunked radio sites

Distances are measured from the center of Pine River.

DOC Redgranite · WISCOM
RFSS 1 · Site 214 (hex D6) · about 7 mi away
Control 858.9375, 859.9375
Voice 856.1375, 856.9375
Wautoma · WISCOM
RFSS 1 · Site 81 (hex 51) · NAC B07 · about 13 mi away
Control 139.1625, 152.2175, 152.6675, 152.7575
Voice 155.46
Berlin · WISCOM
RFSS 1 · Site 29 (hex 1D) · NAC B07 · about 14 mi away
Control 139.6625, 152.7425
Voice 150.86, 151.07, 155.355
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Pine River?

We do not have a fire dispatch channel listed specifically for Pine River. The county-level fire dispatch channels in the same county: Waushara County Fire 154.0550 MHz, narrow FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Pine River?

We do not have a EMS dispatch channel listed specifically for Pine River. The county-level EMS dispatch channels in the same county: Waushara County EMS 155.8650 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Pine River?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Pine River?

For Pine River, start with the DOC Redgranite site of WISCOM. Its control channels are 858.9375, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.