About Powder Horn Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Powder Horn: Sheridan County Fire 154.1750 MHz, narrow FM, 118.8 PL. County-level ems dispatch that covers Powder Horn: Sheridan County EMS 155.2950 MHz, narrow FM, 114.8 PL. Trunked: WyoLink, for example Sheridan County Fire talkgroup 13314 (hex 3402).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Powder Horn, start with the Banner Ridge site of WyoLink, about 6 miles away. Its control channels: 152.54, 152.63 MHz.
Data updated .
Sheridan County channels that also cover Powder Horn
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheridan County Fire | Sheridan County Fire Dispatch | 154.1750 In 158.8500 | 118.8 PL | FMN | WPXC685 |
| Sheridan County Fire | Sheridan County Sheriff / Rural Fire Dispatch | 154.9800 In 155.8050 | 88.5 PL | FMN | WPYM207 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheridan County Fire | Sheridan County Search & Rescue | 154.0550 In 158.9250 | CSQ | FMN | WPGK792 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sheridan County EMS | Sheridan County EMS | 155.2950 | 114.8 PL | FMN | WPQK414 |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sheridan County Fire | Sheridan County Fire – Dispatch | 13314 | 3402 | D |
| Sheridan County Fire | Fire Paging | 20118 | 4e96 | D |
| Sheridan County EMS | Sheridan County EMS – Dispatch | 13315 | 3403 | D |
Nearest trunked radio sites
Distances are measured from the center of Powder Horn.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Powder Horn?
We do not have a fire dispatch channel listed specifically for Powder Horn. The county-level fire dispatch channels in the same county: Sheridan County Fire 154.1750 MHz, narrow FM, 118.8 PL.
What frequency does EMS or the ambulance service use in Powder Horn?
We do not have a EMS dispatch channel listed specifically for Powder Horn. The county-level EMS dispatch channels in the same county: Sheridan County EMS 155.2950 MHz, narrow FM, 114.8 PL.
Do fire departments and EMS use a trunked radio system in Powder Horn?
Yes. The county-level systems that cover Powder Horn are Fire and EMS talkgroups are listed for WyoLink: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Powder Horn?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Powder Horn?
For Powder Horn, start with the Banner Ridge site of WyoLink. Its control channels are 152.54, 152.63 MHz. Program a control channel first; the scanner finds the voice channels from it.