About Point of Rocks Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Point of Rocks: Sweetwater County Fire 150.8050 MHz, narrow FM, 91.5 PL. Trunked: WyoLink, for example Sweetwater County Fire talkgroup 407 (hex 197).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: WyoLink: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Point of Rocks, start with the Rock Springs site of WyoLink, about 24 miles away. Its control channels: 854.9625, 855.2375 MHz.
Data updated .
Sweetwater County channels that also cover Point of Rocks
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sweetwater County Fire | Sweetwater County Fire | 150.8050 In 153.9125 | 91.5 PL | FMN | WQBA208 |
| Sweetwater County Fire | Sweetwater County Fire Tone-Outs | 152.0075 | CSQ | FMN | WQYX946 |
| Sweetwater County Fire | Sweetwater County Fire | 155.0550 In 155.7150 | 118.8 PL | FMN | KNBZ664 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sweetwater County EMS | Sweetwater County Search and Rescue | 155.2200 | FMN | WXB892 |
WyoLink
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sweetwater County Fire | Fire District 1 | 407 | 197 | D |
| Sweetwater County Fire | Fire District 1A | 418 | 1a2 | D |
| Sweetwater County Fire | Fire Operations | 433 | 1b1 | D |
| Sweetwater County EMS | Sweetwater County EMS – Dispatch | 410 | 19a | D |
| Sweetwater County EMS | Castle Rock Ambulance Service | 421 | 1a5 | D |
| Sweetwater County EMS | Rock Springs Regional Ambulance | 423 | 1a7 | D |
| Sweetwater County EMS | Sweetwater Medics | 422 | 1a6 | D |
Nearest trunked radio sites
Distances are measured from the center of Point of Rocks.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Point of Rocks?
We do not have a fire dispatch channel listed specifically for Point of Rocks. The county-level fire dispatch channels in the same county: Sweetwater County Fire 150.8050 MHz, narrow FM, 91.5 PL.
Do fire departments and EMS use a trunked radio system in Point of Rocks?
Yes. The county-level systems that cover Point of Rocks are Fire and EMS talkgroups are listed for WyoLink: 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Point of Rocks?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Point of Rocks?
For Point of Rocks, start with the Rock Springs site of WyoLink. Its control channels are 854.9625, 855.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.