About Fair Oaks Fire and EMS Frequencies
Quick answer: Fire dispatch for Fair Oaks: Fair Oaks Fire 155.1450 MHz, narrow FM, 141.3 PL (expired). County-level ems dispatch that covers Fair Oaks: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Fair Oaks conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fair Oaks Fire Expired: Expired 10/23 | Fair Oaks Fire – Dispatch | 155.1450 In 153.7700 | 141.3 PL | FMN | WPYT209 |
Cross County channels that also cover Fair Oaks
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cross County Fire | Vanndale Fire | 155.2200 In 159.1350 | 156.7 PL | FMN | WPWZ441 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cross County Fire | Bay Village Fireground (DB – Cherry Valley Fire Department) | 154.7100 | FMN | WPOY251 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cross County EMS | Cross County EMS – Dispatch | 154.4150 In 159.3150 | CC 10 · TG 7001 · SL 1 | DMR | KNGV239 |
Nearest trunked radio sites
Distances are measured from the center of Fair Oaks.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fair Oaks?
Fire dispatch channels listed for Fair Oaks: Fair Oaks Fire 155.1450 MHz, narrow FM, 141.3 PL (expired).
What frequency does EMS or the ambulance service use in Fair Oaks?
We do not have a EMS dispatch channel listed specifically for Fair Oaks. The county-level EMS dispatch channels in the same county: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.
What scanner do I need to listen to fire and EMS in Fair Oaks?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Fair Oaks?
For Fair Oaks, start with the Fair Oaks site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.2125, 851.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Fair Oaks fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Fair Oaks are marked encrypted.