Skip to content

Vanndale Fire and EMS Frequencies

We do not have frequencies listed specifically for Vanndale in Cross County, Arkansas yet. Countywide channels for Cross County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fair Oaks (Arkansas Wireless Information Network (AWIN)), about 15 miles away.

About Vanndale Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Vanndale: Cross County Fire 155.2200 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Vanndale: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Cross County channels that also cover Vanndale

Fire Dispatch

Fire Dispatch frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County FireVanndale Fire155.2200
In 159.1350
156.7 PLFMNWPWZ441

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County FireBay Village Fireground (DB – Cherry Valley Fire Department)154.7100FMNWPOY251

EMS Dispatch

EMS Dispatch frequencies for Cross County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cross County EMSCross County EMS – Dispatch154.4150
In 159.3150
CC 10 · TG 7001 · SL 1DMRKNGV239

Nearest trunked radio sites

Distances are measured from the center of Vanndale.

Fair Oaks · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 57 (hex 39) · NAC 180 · about 15 mi away
Control 851.2125, 851.4625
Voice 853.3125, 853.5625, 853.8625
Harrisburg 700 · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 74 (hex 4A) · NAC 184 · about 20 mi away
Control 771.55625, 772.18125
Voice 769.78125, 770.53125, 771.18125, 772.60625, 772.88125, 774.88125
Kettle Road · St. Francis County Public Safety (AR)
Site 1 (hex 1) · about 20 mi away
Voice 154.845, 155.175, 158.7975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Vanndale?

We do not have a fire dispatch channel listed specifically for Vanndale. The county-level fire dispatch channels in the same county: Cross County Fire 155.2200 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Vanndale?

We do not have a EMS dispatch channel listed specifically for Vanndale. The county-level EMS dispatch channels in the same county: Cross County EMS 154.4150 MHz, DMR, CC 10 · TG 7001 · SL 1.

What scanner do I need to listen to fire and EMS in Vanndale?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Vanndale?

For Vanndale, start with the Fair Oaks site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.2125, 851.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.