Skip to content

Center Point Fire and EMS Frequencies

We do not have frequencies listed specifically for Center Point in Howard County, Arkansas yet. Countywide channels for Howard County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Yancy (Arkansas Wireless Information Network (AWIN)), about 15 miles away.

About Center Point Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Center Point: Provo Fire 154.2725 MHz, DMR, no tone. County-level ems dispatch that covers Center Point: Howard Memorial Hospital EMS 155.2350 MHz, narrow FM, 103.5 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • 5 entries are marked expired, so they may no longer be in use.

Data updated .

Howard County channels that also cover Center Point

Fire Dispatch

Fire Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Provo FireProvo Fire154.2725
In 159.1650
DMRWQYC287

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard County Fire Expired: Expired 5/25Fire/OEM – Center Point (Digital)154.4000CC 0 · TG * · SL *DMRWPFG517
Howard County Fire Expired: Expired 5/25Fire/OEM – Center Point (Analog)154.4000173.8 PLFMNWPFG517
Howard County Fire Expired: Expired 5/25Fire/OEM – Nashville Repeater154.9800173.8 PLFMNWPFG517
Howard County Fire Expired: Expired 5/25Fire/OEM – Dierks Repeater155.8800173.8 PLFMNWPFG517

EMS Dispatch

EMS Dispatch frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Howard Memorial Hospital EMSHoward Memorial Hospital EMS – Dispatch155.2350
In 153.8450
103.5 PLFMNWPMW816

EMS Tactical

EMS Tactical frequencies for Howard County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Search and Rescue Expired: Expired 10/23Search and Rescue – Tactical Operations155.6550FMNWPYS226

Nearest trunked radio sites

Distances are measured from the center of Center Point.

Yancy · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 20 (hex 14) · NAC 18D · about 15 mi away
Control 858.2125, 859.2125
Voice 851.4875, 853.5375, 853.8
Tall Peak · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 22 (hex 16) · about 25 mi away
Control 853.1625, 853.7375
Voice 851.6, 851.85, 860.9875
Delight · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 21 (hex 15) · NAC 182 · about 27 mi away
Control 852.7, 852.95
Voice 851.125, 851.375, 851.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Center Point?

We do not have a fire dispatch channel listed specifically for Center Point. The county-level fire dispatch channels in the same county: Provo Fire 154.2725 MHz, DMR, no tone.

What frequency does EMS or the ambulance service use in Center Point?

We do not have a EMS dispatch channel listed specifically for Center Point. The county-level EMS dispatch channels in the same county: Howard Memorial Hospital EMS 155.2350 MHz, narrow FM, 103.5 PL.

What scanner do I need to listen to fire and EMS in Center Point?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Center Point?

For Center Point, start with the Yancy site of Arkansas Wireless Information Network (AWIN). Its control channels are 858.2125, 859.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.