Skip to content

Newhope Fire and EMS Frequencies

We do not have frequencies listed specifically for Newhope in Pike County, Arkansas yet. Countywide channels for Pike County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tall Peak (Arkansas Wireless Information Network (AWIN)), about 15 miles away.

About Newhope Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Newhope: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Newhope: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • 3 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Pike County channels that also cover Newhope

Fire Dispatch

Fire Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FirePike County Fire – Dispatch (County)154.1900
In 159.0600
146.2 PLFMNWQCY587

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County FirePike County Fire – North (County)154.1900
In 159.0600
CC 2 · TG 24 · SL 1DMR EncryptedWQCY587
Pike County FirePike County Fire – South (County)154.1900
In 159.0600
CC 1 · TG 25 · SL 1DMR EncryptedWQCY587
Pike County FireDelight Fire – Tactical154.1900
In 159.0600
CC 3 · TG 26 · SL 1DMR EncryptedWQCY587

EMS Dispatch

EMS Dispatch frequencies for Pike County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pike County EMSRegional Med Transport153.9200
In 158.8950
131.8 PLFMNWNGV828

Nearest trunked radio sites

Distances are measured from the center of Newhope.

Tall Peak · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 22 (hex 16) · about 15 mi away
Control 853.1625, 853.7375
Voice 851.6, 851.85, 860.9875
High Peak · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 10 (hex A) · NAC 18A · about 23 mi away
Control 852.7875, 853.8875
Voice 851.1, 851.35, 851.9875
Yancy · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 20 (hex 14) · NAC 18D · about 26 mi away
Control 858.2125, 859.2125
Voice 851.4875, 853.5375, 853.8
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Newhope?

We do not have a fire dispatch channel listed specifically for Newhope. The county-level fire dispatch channels in the same county: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Newhope?

We do not have a EMS dispatch channel listed specifically for Newhope. The county-level EMS dispatch channels in the same county: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.

What scanner do I need to listen to fire and EMS in Newhope?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Newhope?

For Newhope, start with the Tall Peak site of Arkansas Wireless Information Network (AWIN). Its control channels are 853.1625, 853.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.