About Kirby Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kirby: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Kirby: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Kirby conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kirby Fire Expired: Expired 5/18 | Kirby Fire – Fire Ground | 155.1450 In 158.8800 | FMN | WQIS643 |
Pike County channels that also cover Kirby
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Pike County Fire – Dispatch (County) | 154.1900 In 159.0600 | 146.2 PL | FMN | WQCY587 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Fire | Pike County Fire – North (County) | 154.1900 In 159.0600 | CC 2 · TG 24 · SL 1 | DMR Encrypted | WQCY587 |
| Pike County Fire | Pike County Fire – South (County) | 154.1900 In 159.0600 | CC 1 · TG 25 · SL 1 | DMR Encrypted | WQCY587 |
| Pike County Fire | Delight Fire – Tactical | 154.1900 In 159.0600 | CC 3 · TG 26 · SL 1 | DMR Encrypted | WQCY587 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County EMS | Regional Med Transport | 153.9200 In 158.8950 | 131.8 PL | FMN | WNGV828 |
Nearest trunked radio sites
Distances are measured from the center of Kirby.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kirby?
We do not have a fire dispatch channel listed specifically for Kirby. The county-level fire dispatch channels in the same county: Pike County Fire 154.1900 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Kirby?
We do not have a EMS dispatch channel listed specifically for Kirby. The county-level EMS dispatch channels in the same county: Pike County EMS 153.9200 MHz, narrow FM, 131.8 PL.
What scanner do I need to listen to fire and EMS in Kirby?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Kirby?
For Kirby, start with the High Peak site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.7875, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Kirby fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Kirby are marked encrypted.