About Pencil Bluff Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pencil Bluff: Montgomery County Fire 154.1000 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Pencil Bluff: Lifenet EMS 151.3700 MHz, narrow FM, no tone; Southwest EMS 153.4400 MHz, narrow FM, 192.8 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Montgomery County channels that also cover Pencil Bluff
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire | Montgomery County Fire – Dispatch | 154.1000 In 158.7975 | 100.0 PL | FMN | WNJH715 |
| Montgomery County Fire | Montgomery County Fire – Dispatch | 154.1000 In 158.9250 | NXDN48 | WNJH715 | |
| Montgomery County Fire | Montgomery County Fire – Dispatch | 154.9950 In 158.8350 | 100.0 PL | FMN | WNCU632 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Montgomery County Fire | Montgomery County Fire – Fire Ground | 154.5700 | FMN | — | |
| Montgomery County Fire | Montgomery County Fire – Fire Ground | 154.6000 | 192.8 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lifenet EMS | Lifenet EMS | 151.3700 In 150.7900 | FMN | WPVC268 | |
| Southwest EMS | Southwest EMS | 153.4400 In 159.6750 | 192.8 PL | FMN | WPNU238 |
Nearest trunked radio sites
Distances are measured from the center of Pencil Bluff.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pencil Bluff?
We do not have a fire dispatch channel listed specifically for Pencil Bluff. The county-level fire dispatch channels in the same county: Montgomery County Fire 154.1000 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Pencil Bluff?
We do not have a EMS dispatch channel listed specifically for Pencil Bluff. The county-level EMS dispatch channels in the same county: Lifenet EMS 151.3700 MHz, narrow FM, no tone; Southwest EMS 153.4400 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Pencil Bluff?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Pencil Bluff?
For Pencil Bluff, start with the High Peak site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.7875, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.