About Downieville-Lawson-Dumont Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Downieville-Lawson-Dumont: Clear Creek County Fire 155.0250 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Clear Creek County Fire talkgroup 3203 (hex c83).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Downieville-Lawson-Dumont, start with the Bellevue Mountain site of State of Colorado DTRS, about 3 miles away. Its control channels: 771.31875, 771.64375, 771.89375 MHz.
Data updated .
Clear Creek County channels that also cover Downieville-Lawson-Dumont
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clear Creek County Fire | Clear Creek County Fire – Dispatch | 155.0250 | 100.0 PL | FMN | KEO378 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 154.3550 | 100.0 PL | FMN | KB48100 |
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 155.1000 | 100.0 PL | FMN | KCU836 |
| Clear Creek County Fire | Alpine Rescue | 155.1600 | FMN | KWF677 | |
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 155.1750 In 156.0000 | 100.0 PL | FMN | WPWM996 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clear Creek County Fire | Clear Creek County Fire – Dispatch | 3203 | c83 | D |
| Clear Creek County Fire | Clear Creek County Fire – Fire Ground | 3204 | c84 | D |
| Clear Creek County Fire | Search and Rescue | 3208 | c88 | D |
Nearest trunked radio sites
Distances are measured from the center of Downieville-Lawson-Dumont.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Downieville-Lawson-Dumont?
We do not have a fire dispatch channel listed specifically for Downieville-Lawson-Dumont. The county-level fire dispatch channels in the same county: Clear Creek County Fire 155.0250 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Downieville-Lawson-Dumont?
Yes. The county-level systems that cover Downieville-Lawson-Dumont are Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Downieville-Lawson-Dumont?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Downieville-Lawson-Dumont?
For Downieville-Lawson-Dumont, start with the Bellevue Mountain site of State of Colorado DTRS. Its control channels are 771.31875, 771.64375, 771.89375, 772.26875 MHz. Program a control channel first; the scanner finds the voice channels from it.