Skip to content

City of Creede Fire and EMS Frequencies

We do not have frequencies listed specifically for City of Creede in Mineral County, Colorado yet. Countywide channels for Mineral County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Creede (State of Colorado DTRS), about 1 miles away.

About City of Creede Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers City of Creede: Mineral County EMS 154.1000 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Mineral County Fire talkgroup 8281 (hex 2059).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For City of Creede, start with the Creede site of State of Colorado DTRS, about 1 miles away. Its control channels: 852.8875, 853.35, 853.65 MHz.

Data updated .

Mineral County channels that also cover City of Creede

EMS Dispatch

EMS Dispatch frequencies for Mineral County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mineral County EMSMineral County EMS – Dispatch154.1000FMNWQXP652

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Mineral County FireFire/EMS Dispatch82812059D
Mineral County FireMineral County Fire – Tactical Channel8282205aD

Nearest trunked radio sites

Distances are measured from the center of City of Creede.

Creede · State of Colorado DTRS
RFSS 5 · Site 67 (hex 43) · NAC D13 · about 1 mi away
Control 852.8875, 853.35, 853.65, 853.9
Voice 852.1625
Hill 71 · State of Colorado DTRS
RFSS 5 · Site 80 (hex 50) · NAC D10 · about 20 mi away
Control 852.2125, 853.0375, 853.5625, 853.8
Voice 851.65
Pool Table Mountain · State of Colorado DTRS
RFSS 5 · Site 42 (hex 2A) · NAC D1A · about 20 mi away
Control 852.175, 853.3375, 853.5875, 853.9125
Voice 851.2, 851.475, 854.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in City of Creede?

We do not have a EMS dispatch channel listed specifically for City of Creede. The county-level EMS dispatch channels in the same county: Mineral County EMS 154.1000 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in City of Creede?

Yes. The county-level systems that cover City of Creede are Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in City of Creede?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in City of Creede?

For City of Creede, start with the Creede site of State of Colorado DTRS. Its control channels are 852.8875, 853.35, 853.65, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.