Skip to content

Alpine Fire and EMS Frequencies

Alpine in Rio Grande County, Colorado has 0 conventional frequencies and 3 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Pool Table Mountain (State of Colorado DTRS), about 3 miles away.

About Alpine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Alpine: Rio Grande County Fire 154.2200 MHz, FM, 156.7 PL. Trunked: State of Colorado DTRS, for example Colorado Search and Rescue talkgroup 1540 (hex 604).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Alpine, start with the Pool Table Mountain site of State of Colorado DTRS, about 3 miles away. Its control channels: 852.175, 853.3375, 853.5875 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Alpine trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Colorado Search and RescueAlpine Rescue Team Main1540604D
2 encrypted talkgroups (cannot be monitored)
State of Colorado DTRS encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Colorado Search and RescueAlpine Rescue Team Tactical15305faD Encrypted
Colorado Search and RescueAlpine Rescue Team Tactical15325fcD Encrypted

Rio Grande County channels that also cover Alpine

Fire Dispatch

Fire Dispatch frequencies for Rio Grande County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rio Grande County FireAlamosa Fire Protection District154.2200
In 158.8950
156.7 PLFMWRY292

Nearest trunked radio sites

Distances are measured from the center of Alpine.

Pool Table Mountain · State of Colorado DTRS
RFSS 5 · Site 42 (hex 2A) · NAC D1A · about 3 mi away
Control 852.175, 853.3375, 853.5875, 853.9125
Voice 851.2, 851.475, 854.9625
Wolf Creek Pass · State of Colorado DTRS
RFSS 5 · Site 27 (hex 1B) · NAC D1B · about 18 mi away
Control 851.4, 852.2, 852.4125, 853.0625
Voice 851.0375, 854.6875, 854.9875
Creede · State of Colorado DTRS
RFSS 5 · Site 67 (hex 43) · NAC D13 · about 22 mi away
Control 852.8875, 853.35, 853.65, 853.9
Voice 852.1625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alpine?

We do not have a fire dispatch channel listed specifically for Alpine. The county-level fire dispatch channels in the same county: Rio Grande County Fire 154.2200 MHz, FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Alpine?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Alpine?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Alpine?

For Alpine, start with the Pool Table Mountain site of State of Colorado DTRS. Its control channels are 852.175, 853.3375, 853.5875, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alpine fire and EMS talkgroups encrypted?

2 of the 3 talkgroups listed for Alpine are marked fully or partly encrypted; a scanner cannot decode encrypted audio.