About Blue Sky Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Blue Sky: Morgan County Fire 158.8200 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Blue Sky: Morgan County EMS 153.8450 MHz, narrow FM, 127.3 PL. Trunked: State of Colorado DTRS, for example Morgan County Fire talkgroup 9031 (hex 2347).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Blue Sky, start with the Fort Morgan site of State of Colorado DTRS, about 6 miles away. Its control channels: 851.775, 852.3625, 852.875 MHz.
Data updated .
Morgan County channels that also cover Blue Sky
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County Fire | Morgan County Fire – Dispatch | 158.8200 | 127.3 PL | FMN | WNQW243 |
| Morgan County Fire | Fire Operations | 158.9400 In 154.0850 | 127.3 PL | FMN | KTR550 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County EMS | Morgan County EMS – Dispatch | 153.8450 In 151.3250 | 127.3 PL | FMN | WNRS352 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Morgan County Fire | County Fire Dispatch | 9031 | 2347 | D |
| Morgan County Fire | County Fire & EMS | 9034 | 234a | D |
| Morgan County EMS | County EMS Operations | 9035 | 234b | D |
Nearest trunked radio sites
Distances are measured from the center of Blue Sky.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Blue Sky?
We do not have a fire dispatch channel listed specifically for Blue Sky. The county-level fire dispatch channels in the same county: Morgan County Fire 158.8200 MHz, narrow FM, 127.3 PL.
What frequency does EMS or the ambulance service use in Blue Sky?
We do not have a EMS dispatch channel listed specifically for Blue Sky. The county-level EMS dispatch channels in the same county: Morgan County EMS 153.8450 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Blue Sky?
Yes. The county-level systems that cover Blue Sky are Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Blue Sky?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Blue Sky?
For Blue Sky, start with the Fort Morgan site of State of Colorado DTRS. Its control channels are 851.775, 852.3625, 852.875, 853.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.