Skip to content

Snyder Fire and EMS Frequencies

Snyder in Morgan County, Colorado has 0 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Pawnee (State of Colorado DTRS), about 10 miles away.

About Snyder Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Snyder: Morgan County Fire 158.8200 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Snyder: Morgan County EMS 153.8450 MHz, narrow FM, 127.3 PL. Trunked: State of Colorado DTRS, for example Morgan County Fire talkgroup 9051 (hex 235b).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup; State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Snyder, start with the Pawnee site of State of Colorado DTRS, about 10 miles away. Its control channels: 852.375, 852.65, 852.8625 MHz.

Data updated .

Snyder trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Morgan County FireHillrose / Snyder Fire Operations9051235bD

Morgan County channels that also cover Snyder

Fire Dispatch

Fire Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County FireMorgan County Fire – Dispatch158.8200127.3 PLFMNWNQW243
Morgan County FireFire Operations158.9400
In 154.0850
127.3 PLFMNKTR550

EMS Dispatch

EMS Dispatch frequencies for Morgan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Morgan County EMSMorgan County EMS – Dispatch153.8450
In 151.3250
127.3 PLFMNWNRS352

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Morgan County FireCounty Fire Dispatch90312347D
Morgan County FireCounty Fire & EMS9034234aD
Morgan County EMSCounty EMS Operations9035234bD

Nearest trunked radio sites

Distances are measured from the center of Snyder.

Pawnee · State of Colorado DTRS
RFSS 3 · Site 29 (hex 1D) · NAC D1D · about 10 mi away
Control 852.375, 852.65, 852.8625, 853.275
Voice 851.5875, 854.7125, 859.5625
Fort Morgan · State of Colorado DTRS
RFSS 3 · Site 16 (hex 10) · NAC D10 · about 17 mi away
Control 851.775, 852.3625, 852.875, 853.4375
Voice 851.225, 854.2875, 854.5125, 859.0125
Akron · State of Colorado DTRS
RFSS 3 · Site 17 (hex 11) · NAC D11 · about 21 mi away
Control 852.975, 853.25, 853.5, 853.95
Voice 852.1375, 854.6875, 858.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Snyder?

We do not have a fire dispatch channel listed specifically for Snyder. The county-level fire dispatch channels in the same county: Morgan County Fire 158.8200 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Snyder?

We do not have a EMS dispatch channel listed specifically for Snyder. The county-level EMS dispatch channels in the same county: Morgan County EMS 153.8450 MHz, narrow FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Snyder?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Snyder?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Snyder?

For Snyder, start with the Pawnee site of State of Colorado DTRS. Its control channels are 852.375, 852.65, 852.8625, 853.275 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Snyder fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Snyder are marked encrypted.