Skip to content

Phippsburg Fire and EMS Frequencies

We do not have frequencies listed specifically for Phippsburg in Routt County, Colorado yet. Countywide channels for Routt County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Oak Creek (State of Colorado DTRS), about 5 miles away.

About Phippsburg Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Phippsburg: Routt County Fire 154.3700 MHz, narrow FM, 127.3 PL. Trunked: State of Colorado DTRS, for example Routt County Fire talkgroup 11659 (hex 2d8b).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Phippsburg, start with the Oak Creek site of State of Colorado DTRS, about 5 miles away. Its control channels: 852.675, 853.125, 853.3625 MHz.

Data updated .

Routt County channels that also cover Phippsburg

Fire Dispatch

Fire Dispatch frequencies for Routt County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Routt County FireRoutt County Fire-EMS (multiple site PL tones)154.3700
In 153.8300
127.3 PLFMNWPTN305
Routt County FireRoutt County Fire-EMS Tone-outs154.3700
In 153.8300
114.8 PLFMNWPTN305

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Routt County FireCounty Fire 1 Dispatch116592d8bD
Routt County FireWest Routt Tactical116612d8dD
Routt County FireNorth Routt Fire Tactical116632d8fD
Routt County FireYampa Town Fire Tactical116642d90D
Routt County FireCounty Fire 2 Response116652d91D
Routt County FireCounty Search & Rescue116662d92D

Nearest trunked radio sites

Distances are measured from the center of Phippsburg.

Oak Creek · State of Colorado DTRS
RFSS 2 · Site 92 (hex 5C) · NAC D1C · about 5 mi away
Control 852.675, 853.125, 853.3625, 853.7125
Voice 851.55, 852.1875
Walton Peak · State of Colorado DTRS
RFSS 2 · Site 37 (hex 25) · NAC D15 · about 16 mi away
Control 851.45, 851.975, 852.475, 853.625
Voice 851.275, 856.1875
King Mountain · State of Colorado DTRS
RFSS 2 · Site 31 (hex 1F) · NAC D1F · about 16 mi away
Control 851.8125, 852.4, 852.6125, 853.2625
Voice 851.375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Phippsburg?

We do not have a fire dispatch channel listed specifically for Phippsburg. The county-level fire dispatch channels in the same county: Routt County Fire 154.3700 MHz, narrow FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Phippsburg?

Yes. The county-level systems that cover Phippsburg are Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Phippsburg?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Phippsburg?

For Phippsburg, start with the Oak Creek site of State of Colorado DTRS. Its control channels are 852.675, 853.125, 853.3625, 853.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.