About Kirk Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kirk: Yuma County Fire 154.4150 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Yuma County Fire talkgroup 9042 (hex 2352).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kirk, start with the Idalia site of State of Colorado DTRS, about 10 miles away. Its control channels: 852.075, 853.425, 853.7 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Yuma County channels that also cover Kirk
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yuma County Fire | Yuma County Fire – Dispatch | 154.4150 In 153.7700 | FMN | WPSL533 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Yuma County Fire | County Fire | 9042 | 2352 | D |
| Yuma County Fire | Wages Volunteer Fire Department | 9054 | 235e | D |
| Yuma County EMS | County EMS | 9043 | 2353 | D |
| Yuma County EMS | South Yuma EMS | 9252 | 2424 | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Yuma County EMS | County EMS Secure | 9053 | 235d | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Kirk.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kirk?
We do not have a fire dispatch channel listed specifically for Kirk. The county-level fire dispatch channels in the same county: Yuma County Fire 154.4150 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Kirk?
Yes. The county-level systems that cover Kirk are Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kirk?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kirk?
For Kirk, start with the Idalia site of State of Colorado DTRS. Its control channels are 852.075, 853.425, 853.7, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.