About Bascom Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bascom: Jackson County Fire 155.1450 MHz, DMR, CC 1 · TG 20300 · SL 1. County-level ems dispatch that covers Bascom: Jackson County EMS 463.1000 MHz, FM, 146.2 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Jackson County channels that also cover Bascom
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County Fire | Fire/Rescue Dispatch | 155.1450 In 153.9050 | CC 1 · TG 20300 · SL 1 | DMR | WQTE646 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | County Medical Coordination | 463.1000 In 468.1000 | 146.2 PL | FM | KAG303 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jackson County EMS | EMS-to-Campbellton/Graceville Hospital | 463.0125 In 468.0125 | 146.2 PL | FM | — |
| Jackson County EMS | EMS-to-Jackson Hospital | 463.1125 In 468.1125 | 146.2 PL | FM | — |
Nearest trunked radio sites
Distances are measured from the center of Bascom.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bascom?
We do not have a fire dispatch channel listed specifically for Bascom. The county-level fire dispatch channels in the same county: Jackson County Fire 155.1450 MHz, DMR, CC 1 · TG 20300 · SL 1.
What frequency does EMS or the ambulance service use in Bascom?
We do not have a EMS dispatch channel listed specifically for Bascom. The county-level EMS dispatch channels in the same county: Jackson County EMS 463.1000 MHz, FM, 146.2 PL.
What scanner do I need to listen to fire and EMS in Bascom?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Bascom?
For Bascom, start with the Bascom site of Statewide Law Enforcement Radio System (P25). Its control channels are 851.45, 851.6875, 852.1875, 854.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.