Skip to content

Grand Ridge Fire and EMS Frequencies

We do not have frequencies listed specifically for Grand Ridge in Jackson County, Florida yet. Countywide channels for Jackson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Shady Grove (Statewide Law Enforcement Radio System (P25)), about 4 miles away.

About Grand Ridge Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Grand Ridge: Jackson County Fire 155.1450 MHz, DMR, CC 1 · TG 20300 · SL 1. County-level ems dispatch that covers Grand Ridge: Jackson County EMS 463.1000 MHz, FM, 146.2 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Jackson County channels that also cover Grand Ridge

Fire Dispatch

Fire Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County FireFire/Rescue Dispatch155.1450
In 153.9050
CC 1 · TG 20300 · SL 1DMRWQTE646

EMS Dispatch

EMS Dispatch frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County EMSCounty Medical Coordination463.1000
In 468.1000
146.2 PLFMKAG303

EMS Tactical

EMS Tactical frequencies for Jackson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson County EMSEMS-to-Campbellton/Graceville Hospital463.0125
In 468.0125
146.2 PLFM—
Jackson County EMSEMS-to-Jackson Hospital463.1125
In 468.1125
146.2 PLFM—

Nearest trunked radio sites

Distances are measured from the center of Grand Ridge.

Shady Grove · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 41 · Site 41 (hex 29) · NAC FC9 · about 4 mi away
Control 853.4625, 853.9625, 854.1875, 854.4625
Inwood · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 91 · Site 91 (hex 5B) · NAC FFB · about 10 mi away
Control 851.95, 852.475, 852.975, 853.4625, 853.9625
Chattahoochee · Gadsden County Public Safety
Site 2 (hex 2) · about 11 mi away
Control 453.325
Voice 453.225, 453.7, 453.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Grand Ridge?

We do not have a fire dispatch channel listed specifically for Grand Ridge. The county-level fire dispatch channels in the same county: Jackson County Fire 155.1450 MHz, DMR, CC 1 · TG 20300 · SL 1.

What frequency does EMS or the ambulance service use in Grand Ridge?

We do not have a EMS dispatch channel listed specifically for Grand Ridge. The county-level EMS dispatch channels in the same county: Jackson County EMS 463.1000 MHz, FM, 146.2 PL.

What scanner do I need to listen to fire and EMS in Grand Ridge?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Grand Ridge?

For Grand Ridge, start with the Shady Grove site of Statewide Law Enforcement Radio System (P25). Its control channels are 853.4625, 853.9625, 854.1875, 854.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.