About Blountstown Fire and EMS Frequencies
Quick answer: Fire dispatch for Blountstown: Blountstown Fire 151.0325 MHz, DMR, CC 1 · TG 1 · SL 1.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Blountstown conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Blountstown Fire | Blountstown Fire Dispatch | 151.0325 In 156.0525 | CC 1 · TG 1 · SL 1 | DMR | WQDB952 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Blountstown Fire | Blountstown Fire Tactical | 158.8650 | CC 1 · TG 1 · SL 1 | DMR | — |
Calhoun County channels that also cover Blountstown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Calhoun County Fire | Calhoun Fire Dispatch | 154.4150 In 150.8050 | CC 1 · TG 1000 · SL 1 | DMR | WNYW755 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Calhoun County Fire | Calhoun Fire Tactical | 154.4150 In 150.8050 | CC 1 · TG 1050 · SL 2 | DMR | WNYW755 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Calhoun County EMS | County Medical Coordination (MED-4) | 463.0750 In 468.0750 | 156.7 PL | FM | WPXW250 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Calhoun County Hospital | EMS-to-Calhoun Liberty Hospital | 463.1625 In 468.1625 | 156.7 PL | FM | WPXW250 |
Nearest trunked radio sites
Distances are measured from the center of Blountstown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Blountstown?
Fire dispatch channels listed for Blountstown: Blountstown Fire 151.0325 MHz, DMR, CC 1 · TG 1 · SL 1.
What scanner do I need to listen to fire and EMS in Blountstown?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Blountstown?
For Blountstown, start with the Calhoun site of Statewide Law Enforcement Radio System (P25). Its control channels are 852.4375, 852.9375, 853.4375, 853.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Blountstown fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Blountstown are marked encrypted.