About Gretna Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gretna: Gadsden County Fire 155.8050 MHz, FM, 251 DPL. County-level ems dispatch that covers Gretna: Gadsden County EMS 463.1250 MHz, FM, 203.5 PL. Trunked: Gadsden County Public Safety, for example Gadsden County Fire talkgroup 1000 (hex 3e8).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gretna, start with the Midway site of Gadsden County Public Safety, about 7 miles away. Its control channels: 460.0875 MHz.
Data updated .
Gadsden County channels that also cover Gretna
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gadsden County Fire | Gadsden County Fire – Dispatch | 155.8050 | 251 DPL | FM | WPQA873 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gadsden County EMS | Gadsden County EMS – Dispatch | 463.1250 In 468.1250 | 203.5 PL | FM | KYK404 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gadsden County Hospital | EMS-to-Gadsden Community Hospital | 463.0125 In 468.0125 | 203.5 PL | FM | KYK404 |
Gadsden County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gadsden County Fire | Gadsden County Fire – Dispatch | 1000 | 3e8 | T |
| Gadsden County Fire | Gadsden County Fire – Tactical Channel | 1001 | 3e9 | T |
| Gadsden County EMS | Gadsden County EMS – Dispatch | 8000 | 1f40 | T |
Nearest trunked radio sites
Distances are measured from the center of Gretna.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gretna?
We do not have a fire dispatch channel listed specifically for Gretna. The county-level fire dispatch channels in the same county: Gadsden County Fire 155.8050 MHz, FM, 251 DPL.
What frequency does EMS or the ambulance service use in Gretna?
We do not have a EMS dispatch channel listed specifically for Gretna. The county-level EMS dispatch channels in the same county: Gadsden County EMS 463.1250 MHz, FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in Gretna?
Yes. The county-level systems that cover Gretna are Fire and EMS talkgroups are listed for Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gretna?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gretna?
For Gretna, start with the Midway site of Gadsden County Public Safety. Its control channels are 460.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.