Skip to content

Greensboro Fire and EMS Frequencies

We do not have frequencies listed specifically for Greensboro in Gadsden County, Florida yet. Countywide channels for Gadsden County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Midway (Gadsden County Public Safety), about 7 miles away.

About Greensboro Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Greensboro: Gadsden County Fire 155.8050 MHz, FM, 251 DPL. County-level ems dispatch that covers Greensboro: Gadsden County EMS 463.1250 MHz, FM, 203.5 PL. Trunked: Gadsden County Public Safety, for example Gadsden County Fire talkgroup 1000 (hex 3e8).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Greensboro, start with the Midway site of Gadsden County Public Safety, about 7 miles away. Its control channels: 460.0875 MHz.

Data updated .

Gadsden County channels that also cover Greensboro

Fire Dispatch

Fire Dispatch frequencies for Gadsden County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gadsden County FireGadsden County Fire – Dispatch155.8050251 DPLFMWPQA873

EMS Dispatch

EMS Dispatch frequencies for Gadsden County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gadsden County EMSGadsden County EMS – Dispatch463.1250
In 468.1250
203.5 PLFMKYK404

Hospitals & Medical

Hospitals & Medical frequencies for Gadsden County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gadsden County HospitalEMS-to-Gadsden Community Hospital463.0125
In 468.0125
203.5 PLFMKYK404

Gadsden County Public Safety

Gadsden County Public Safety talkgroups
AgencyDescriptionTalkgroupHexMode
Gadsden County FireGadsden County Fire – Dispatch10003e8T
Gadsden County FireGadsden County Fire – Tactical Channel10013e9T
Gadsden County EMSGadsden County EMS – Dispatch80001f40T

Nearest trunked radio sites

Distances are measured from the center of Greensboro.

Midway · Gadsden County Public Safety
Site 3 (hex 3) · about 7 mi away
Control 460.0875
Voice 460.2125, 460.4, 460.5875
Quincy · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 47 · Site 47 (hex 2F) · NAC FCF · about 8 mi away
Control 854.1, 854.175, 855.2125, 856.625, 856.65
Quincy · Gadsden County Public Safety
Site 1 (hex 1) · about 8 mi away
Control 453.15
Voice 453.475, 453.5875, 453.8
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Greensboro?

We do not have a fire dispatch channel listed specifically for Greensboro. The county-level fire dispatch channels in the same county: Gadsden County Fire 155.8050 MHz, FM, 251 DPL.

What frequency does EMS or the ambulance service use in Greensboro?

We do not have a EMS dispatch channel listed specifically for Greensboro. The county-level EMS dispatch channels in the same county: Gadsden County EMS 463.1250 MHz, FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Greensboro?

Yes. The county-level systems that cover Greensboro are Fire and EMS talkgroups are listed for Gadsden County Public Safety: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Greensboro?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Greensboro?

For Greensboro, start with the Midway site of Gadsden County Public Safety. Its control channels are 460.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.